http://opendata.unex.es/recurso/educacion/universidad/personal/edfa196b08d46955832c2f318ce56427-antonio-macias-garcia
Relations
- teach:teacherOf
- ou:tienePublicacion
- A novel strategy for the preparation of yttria-stabilized zirconia powders: Deposition and scratching of thin films obtained by the sol-gel method
- APPLICATION OF BIOPRINTING TO REVERSE-ENGINEERED DENTAL IMPLANTS
- Adsorption of Pb<sup>2+</sup> in aqueous solution by SO<inf>2</inf>-treated activated carbon
- Adsorption of Pb<sup>2+</sup> by heat-treated and sulfurized activated carbon
- Adsorption of Zn(II) in aqueous solution by activated carbons prepared from evergreen oak (Quercus rotundifolia L.)
- Adsorption of cadmium by sulphur dioxide treated activated carbon
- Adsorption of mercury, cadmium and lead from aqueous solution on heat-treated and sulphurized activated carbon
- Adsorption of mercury from single and multicomponent metal systems on activated carbon developed from cherry stones
- Adsorption of mercury by carbonaceous adsorbents prepared from rubber of tyre wastes
- Adsorption of paracetamol in hospital wastewater through activated carbon filters
- Aplicaciones del carbón vegetal a partir del estudio de la madera utilizada
- Application of the Rosin-Rammler and Gates-Gaudin-Schuhmann models to the particle size distribution analysis of agglomerated cork
- Aprovechamiento de la goma de neúmatico para la preparación de adsorbentes carbonosos
- Bending strength of black and composite agglomerates of cork
- Caracterización de Ground Tire Rubber y Crumb Tire Rubber mediante modelos matemáticos
- Carbonization and demineralization of coals: A study by means of FT-IR spectroscopy
- Characterisation of elastomer prepared from ground tyre rubber: Morphological and granulometric study
- Characterization of sol-gel coatings deposited on a mechanically treated stainless steel by using a simple non-destructive electrical method
- Charcoal obtained from cherry stones in different carbonization atmospheres
- Cherry stones as precursor of activated carbons for supercapacitors
- Combination of Review and Design of Experiments to Optimize Computational Simulations on Bioprinting Nozzles
- Comparision of new experimental data and predictions by the coupled criterion of FFM for brittle fracture of V-Notched TPB specimens
- Comparison of the potential for bioprinting of different 3D printing technologies
- Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology
- DESARROLLO DE UN DISPOSITIVO PARA EL CONTROL DE VARIABLES EN LA BIOIMPRESIÓN DE HIDROGELES
- DEVELOPMENT OF A DEVICE FOR THE CONTROL OF VARIABLES IN THE BIOPRINTING OF HYDROGELS
- Design of an action protocol for bioconstruction
- Design of an action protocol for bioconstruction
- Design, machining and characterization of the components required for the manufacture of a supercapacitor
- Design, preparation, and characterization of Yttria-Stabilized Zirconia (YSZ) coatings obtained by electrophoretic deposition (EPD)
- Determination of gels molecular structure by computational calculations
- Determination of the energy potential of gases produced in the pyrolysis processes of the vegetal carbon manufacture industry
- Determination of the fractal dimension of activated carbons: Two alternative methods
- Development and characterization of carbon-honeycomb monoliths from kenaf natural fibers: A preliminary study
- Development of activated carbon using vine shoots (Vitis Vinifera) and its use for wine treatment
- Effect of calcination temperature on the textural properties of 3 mol% yttria-stabilized zirconia powders
- Effect of withdrawal rate on the evolution of optical properties of dip-coated yttria-doped zirconia thin films
- Electrical conductivity of activated carbon-metal oxide nanocomposites under compression: A comparison study
- Electrical conductivity of carbon blacks under compression
- Electrical resistivity of YSZ-coated stainless steel electrodes. A study by response surface methodology
- Electrochemical Impedance Analysis for Corrosion Rate Monitoring of Sol–Gel Protective Coatings in Contact with Nitrate Molten Salts for CSP Applications
- Energetic exploitation of vine shoot by gasification processes. A preliminary study
- Estudio granulométrico de regranulados negros de residuos de corcho y su aplicación industrial
- Evolution of bioprinting and current applications
- Fabricación de recubrimientos multicapa para aplicaciones en útiles de mecanizado
- Fabricación de una célula de medidas eléctricas para materiales cerámicos
- Fabrication and characterisation of bioglass and hydroxyapatite-filled scaffolds
- Granulated cork with bark characterised as environment-friendly lightweight aggregate for cement based materials
- Guide for the development and evaluation of supercapacitors with the proposal of a novel design to improve their performance
- Hydrogels for Bioprinting: A Systematic Review of Hydrogels Synthesis, Bioprinting Parameters, and Bioprinted Structures Behavior
- Influence of chemical composition, porosity and fractal dimension on the electrical conductivity of carbon blacks
- Influence of pH value and solvent utilized in the sol-gel synthesis on properties of derived ZrO<inf>2</inf> powders
- Influence of the cooling circulation water on the efficiency of a thermonuclear plant
- Influence of the experimental parameters on the synthesis process of yttria-doped zirconia sol-gel films
- Influence of the quality and uniformity of ceramic coatings on corrosion resistance
- Influence of the type of solvent on the textural evolution of yttria stabilized zirconia powders obtained by the sol-gel method: Characterization and study of the fractal dimension
- Mechanical properties and thermal shock in thin ZrO<inf>2</inf>–Y<inf>2</inf>O<inf>3</inf>–Al<inf>2</inf>O<inf>3</inf> films obtained by the sol-gel method
- Methodology for characterizing the printability of hydrogels
- Metodología de mentoría para profesores noveles: Escuela de Ingenierías Industriales, Badajoz
- Modelling the compression behavior of ground tire rubber
- On the thermal characterization of fibers prepared by cryogenic grinding of scrap tires
- Optimizing the application of infrared spectroscopy for the study of carbonaceous materials
- Physico-chemical properties of low-rank coals: Thermal and demineralisation effects
- Porous structure of activated carbon prepared from cherry stones by chemical activation with phosphoric acid
- Porous texture of activated carbons prepared by phosphoric acid activation of woods
- Preface
- Preparation and characterization activated carbon obtained from black broom
- Preparation and characterization of activated carbons made up from different woods by chemical activation with H<inf>3</inf>PO<inf>4</inf>
- Preparation and characterization of ZrO<inf>2</inf>/Y<inf>2</inf>O<inf>3</inf>/Al<inf>2</inf>O<inf>3</inf>-based microstructured multilayer sol–gel coatings
- Preparation and characterization of activated carbons by activation with H<inf>3</inf>PO<inf>4</inf>
- Preparation and characterization of activated carbons from impregnation pitch by ZnCl <inf>2</inf>
- Preparation and characterization of multilayer coatings on tool steel
- Preparation and textural characterisation of activated carbon from vine shoots (Vitis vinifera) by H <inf>3</inf> PO <inf>4</inf> -Chemical activation
- Preparation of Activated Carbon-SnO<inf>2</inf>, TiO<inf>2</inf>, and WO<inf>3</inf> Catalysts. Study by FT-IR Spectroscopy
- Preparation of Micropore-Containing Adsorbents from Kenaf Fibers and Their Use in Mercury Removal from Aqueous Solution
- Preparation of a cation exchanger from cork waste: Thermodynamic study of the ion exchange processes
- Preparation of activated carbons from bituminous coal pitches
- Preparation of activated carbons previously treated with hydrogen peroxide: Study of their porous texture
- Preparation of activated carbons from chestnut wood by phosphoric acid-chemical activation. Study of microporosity and fractal dimension
- Preparation of activated carbons from olive-tree wood revisited. II. Physical activation with air
- Preparation of active carbons from a commercial holm-oak charcoal: Study of micro- and meso-porosity
- Preparation of activated carbons previously treated with sulfuric acid. A study of their adsorption capacity in solution
- Preparation of activated carbons from cherry stones by activation with potassium hydroxide
- Preparation of activated carbons from walnut wood: A study of microporosity and fractal dimension
- Preparation of activated carbon from cherry stones by physical activation in air. Influence of the chemical carbonisation with H<inf>2</inf>SO<inf>4</inf>
- Preparation of activated carbon from cherry stones by chemical activation with ZnCl <inf>2</inf>
- Preparation of activated carbon from kenaf by activation with H<inf>3</inf>PO<inf>4</inf>. Kinetic study of the adsorption/electroadsorption using a system of supports designed in 3D, for environmental applications
- Preparation of activated carbons from olive-tree wood revisited. I. Chemical activation with H<inf>3</inf>PO<inf>4</inf>
- Preparation of mesoporous and macroporous materials from rubber of tyre wastes
- Production of activated carbons from coffee endocarp by CO<inf>2</inf> and steam activation
- Reacciones químicas: aspectos a considerar
- Reclado de materiales
- Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters
- Relaxation modulus in PMMA and PTFE fitting by fractional Maxwell model
- Retención de mercurio por carbón activado preparado a partir de residuos agroindustriales
- Shock resistance and compression analysis of concrete in expanded polystyrene formworks (EPSFWs)
- Study granulometric and their application to the industrial processes of cork residuals and cork of low quality
- Study of black and composite agglomerates of cork as thermal insulating materials
- Study of sulfur introduction in activated carbon
- Study of the adsorption and electroadsorption process of Cu (II) ions within thermally and chemically modified activated carbon
- Study of the influence of particle size of activate carbon for the manufacture of electrodes for supercapacitors
- Study of the influence of the type of pores present in the electrodes on the behaviour of a SWAGELOK-type supercapacitor
- Study of the pore size distribution and fractal dimension of HNO <inf>3</inf> -treated activated carbons
- Study of thermal degradation kinetics of elastomeric powder (ground tire rubber)
- TEST DEVICE FOR THE OPTIMISATION OF 3D BIOPRINTING
- Tailoring the properties of yttria-stabilized zirconia powders prepared by the sol-gel method for potential use in solid oxide fuel cells
- Temperature dependence of the electrical conductivity of activated carbons prepared from vine shoots by physical and chemical activation methods
- Textural and morphological study of activated carbon fibers prepared from kenaf
- The Excellent Mechanical Properties of Cork: A Novel Approach through the Analysis of Contact Stress
- The development of an activated carbon from cherry stones and its use in the removal of ochratoxin A from red wine
- Theoretical study of the molecular structure for zirconium complexes
- Thermal behaviour of lignocellulosic material in the presence of phosphoric acid. Influence of the acid content in the initial solution
- Tratamiento de vinos tintos españoles con carbón activado preparado a partir de sarmientos de vid: evaluación del efecto sobre el contenido en OTA y la composición polifenólica
- Uptake of lead by carbonaceous adsorbents developed from tire rubber
- Use of cork agglomerates as acoustic absorbents
- Utilización de residuos agroindustriales y sintéticos generados en la Comunidad Autónoma de Extremadura para la preparación de absorbentes carbonosos
- Zirconia-based coatings for the protection of ferritic-martensitic steels in a molten salt environment for CSP technology
- ou:perteneceAGrupoInvestigacion
- ou:imparteDocenciaEnArea
- ou:adscritoACentro
- ou:adscritoADepartamento