http://opendata.unex.es/recurso/educacion/universidad/personal/125212dd3d1f5b924fedb7c17a2fd548-maria-luisa-gonzalez-martin
Relations
- teach:teacherOf
- ou:tienePublicacion
- 3D-PLA-experimental set up to display the electrical background of the so-called geometric factor of electrokinetic cells
- A study of the adsorption of sodium dodecyl sulphonate at the solution- air interface
- AFM probing in aqueous environment of Staphylococcus epidermidis cells naturally immobilised on glass: Physico-chemistry behind the successful immobilisation
- Adhesion of Air Bubbles to a Fluorite Surface in the Presence of Oleate Species
- Adhesion of Enterococcus faecalis 1131 grown under subinhibitory concentrations of ampicillin and vancomycin to a hydrophilic and a hydrophobic substratum
- Adsorption behavior of human plasma fibronectin on hydrophobic and hydrophilic Ti6Al4V substrata and its influence on bacterial adhesion and detachment
- Adsorption enthalpies of sodium dodecyl sulphate onto carbon blacks in the low concentration range
- Adsorption of human fibrinogen and albumin onto hydrophobic and hydrophilic Ti6Al4V powder
- Adsorption of p-nitrophenol on carbon black: temperature effect
- Adsorption of sodium dodecyl sulphate on cassiterite surface
- Advanced oxidation of polynuclear aromatic hydrocarbons in natural waters
- An experimental study about the imbibition of aqueous solutions of low concentration of a non-adsorbable surfactant in a hydrophilic porous medium
- Analysis of the adsorption isotherms of a non-ionic surfactant from aqueous solution onto activated carbons
- Analysis of the hydrophobic behaviour of different strains of Candida parapsilosis under two growth temperatures
- Analysis of the silica surface free energy by the imbibition technique
- Antibacterial effect of novel biodegradable and bioresorbable PLDA/Mg composites
- Application of friction and adhesion force imaging to physico-chemical characterization of Saccharomyces cerevisiae
- Application of photochemical reactor models to UV irradiation of trichloroethylene in water
- Are the soft, liquid-like structures detected around bacteria by ambient dynamic atomic force microscopy capsules?
- Arrangement of SDS adsorbed layer on carbonaceous particles by zeta potential determinations
- Artifacts in AFM images revealed using friction maps
- Atomic force microscopy of mechanically trapped bacterial cells
- BSA adsorption onto nanospheres: Influence of surface curvature as probed by electrophoretic light scattering and UV/vis spectroscopy
- Bacterial Response to the Surface Aging of PLA Matrices Loaded with Active Compounds
- Bacterial adhesion reduction on a biocompatible Si<sup>+</sup> ion implanted austenitic stainless steel
- Bacterial response to spatially organized microtopographic surface patterns with nanometer scale roughness
- Bactericidal behaviour of Ti6Al4V surfaces after exposure to UV-C light
- Bactericidal behaviour of Ti6Al4V after UV irradiation in the presence of adsorbed proteins
- Bactericidal effect of magnesium ions over planktonic and sessile Staphylococcus epidermidis and Escherichia coli
- Balancing microbial and mammalian cell functions on calcium ion-modified implant surfaces
- Bioinspired Quercitrin Nanocoatings: A Fluorescence-Based Method for Their Surface Quantification, and Their Effect on Stem Cell Adhesion and Differentiation to the Osteoblastic Lineage
- Changes on the physico-chemical surface properties and adhesion behaviour of Enterococcus faecalis by the addition of serum or urine to the growth medium
- Characterization Study of Carbonaceous Materials. Calorimetric Heat of Adsorption of p-Nitrophenol
- Characterization of magnesium-polylactic acid films casted on different substrates and doped with diverse amounts of ctab
- Chitosan patterning on titanium implants
- Coadsorption of an anionic and a non-ionic surfactant on calcium fluoride in water
- Colloids and Surfaces A: Physicochemical and Engineering Aspects: Preface
- Comparative study of the hydrophobicity of Candida parapsilosis 294 through macroscopic and microscopic analysis
- Comparison of the use of Washburn's equation in the distance-time and weight-time imbibition techniques
- Controlled silanization-amination reactions on the Ti6Al4V surface for biomedical applications
- Corrosion behavior of surface modifications on titanium dental implant. In situ bacteria monitoring by electrochemical techniques
- Corrosion behaviour and biocompatibility of a novel Ni-free intermetallic coating growth on austenitic steel by hot dipping in an Al-12.6%Si alloy
- Decrease of Staphylococcal adhesion on surgical stainless steel after Si ion implantation
- Decylammonium chloride and cesium perfluorooctanoate surface free energy and their critical micelle concentration
- Dendronized Anionic Gold Nanoparticles: Synthesis, Characterization, and Antiviral Activity
- Determination of components of cassiterite surface free energy from contact angle measurements
- Determination of the carbon black surface free energy components from the heat of immersion measurements
- Determination of the free energy of adsorption on carbon blacks of a nonionic surfactant from aqueous solutions
- Direct Covalent Grafting of Phytate to Titanium Surfaces through Ti-O-P Bonding Shows Bone Stimulating Surface Properties and Decreased Bacterial Adhesion
- Direct surface probing of cell wall-defective mutants of Saccharomyces cerevisiae by atomic force microscopy
- Distance-time measurements in capillary penetration: Choice of the coordinate system
- Effect of UV irradiation on the surface Gibbs energy of Ti6Al4V and thermally oxidized Ti6Al4V
- Effect of plasma treatment on the surface properties of polylactic acid films
- Effect of spontaneous and water-based passivation on components and parameters of Ti6Al4V (ELI grade) surface tension and its wettability by an aqueous solution of sucrose ester surfactants
- Effect of two hydrocarbon and one fluorocarbon surfactant mixtures on the surface tension and wettability of polymers
- Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response
- Electric characterization of the Ti6Al4V surface prior to and after exposure to UV radiation
- Electrical conductivity measurements for the systems decylammonium chloride/water and cesium perfluorooctanoate/water in the isotropic phase
- Electrochemical analysis of the UV treated bactericidal Ti6Al4V surfaces
- Electrochemical research of Ti6Al4V alloy after a process of irradiation UV
- Electrodeposited Zinc Coatings for Biomedical Application: Morphology, Corrosion and Biological Behaviour
- Experimental analysis of the influence of surface topography on the adhesion force as measured by an AFM
- Flavonoid-modified surfaces: Multifunctional bioactive biomaterials with osteopromotive, anti-inflammatory, and anti-fibrotic potential
- Force spectroscopy-based simultaneous topographical and mechanical characterization to study polymer-to-polymer interactions in coated alginate microspheres
- Free energy of interaction of sodium dodecyl sulfate in aqueous solution with carbon black surfaces
- Functional living biointerphases
- Hydrocarbons imbibition for geometrical characterization of porous media through the effective radius approach
- Impact of PLA/Mg films degradation on surface physical properties and biofilm survival
- Improvement of data logging for an LKB 8700 calorimeter
- In vitro biocompatibility of an ultrafine grained zirconium
- In vitro biocompatibility and bacterial adhesion of physico-chemically modified Ti6Al4V surface by means of UV irradiation
- In vivo bactericidal efficacy of the Ti6Al4V surface after ultraviolet C treatment
- In vivo bactericidal efficacy of farnesol on Ti6Al4V implants
- Incorporation of Mg particles into PDLLA regulates mesenchymal stem cell and macrophage responses
- Influence of effective porosity in the determination of contact angles in porous solids by imbibition techniques
- Influence of n-alkylammonium chlorides on the adhesion of air bubbles to the fluorite surface
- Influence of porosity on the adsorption enthalpies of a non-ionic surfactant onto carbonaceous materials
- Influence of slight microstructural gradients on the surface properties of Ti6Al4V irradiated by UV
- Influence of solvent and substrate on hydrophobicity of pla films
- Influence of the growth medium, suspending liquid and measurement temperature on the physico-chemical surface properties of two enterococci strains
- Influence of the interfacial adsorptions on the imbibition of aqueous solutions of low concentration of the non-ionic surfactant Triton X-100 into calcium fluoride porous medium
- Influence of the meniscus at the bottom of the solid plate on imbibition experiments
- Influence of the regeneration temperature on the phenols adsorption on activated carbon
- Insights into bacterial contact angles: Difficulties in defining hydrophobicity and surface Gibbs energy
- Ionic liquid microdroplets as versatile lithographic molds for sculpting curved topographies on soft materials surfaces
- Ionic surfactant adsorption onto activated carbons
- Kinetic modelling of aqueous trichloroethylene direct ozonation in a continuous tank
- Kinetic of adhesion of S. epidermidis with different EPS production on Ti6Al4V surfaces
- Looking at the micro-topography of polished and blasted Ti-based biomaterials using atomic force microscopy and contact angle goniometry
- Mari Puri y la ingeniería interfacial
- Mechanical, structural, and biological evaluation of multilayer HA-Ag/TiO<inf>2</inf>/TiN/Ti coatings on Ti6Al4V obtained by magnetron sputtering for implant applications
- Micro-structured and self-assembled patterns in PLA-cast films as a function of CTAB content, magnesium and substratum hydrophobicity
- Microdrop generation and deposition of ionic liquids
- Modification of physico-chemical surface properties and growth of Staphylococcus aureus under hyperglycemia and ketoacidosis conditions
- Nano-mechanical exploration of the surface and sub-surface of hydrated cells of Staphylococcus epidermidis
- Nanoscale aggregation phenomena at the contact line of air-drying pure water droplets on silicon revealed by atomic force microscopy
- Nitrogen adsorption isotherms on carbonaceous materials. Comparison of BET and Langmuir surface areas
- Non-covalent derivatization of aminosilanized titanium alloy implants Silver-enhanced coating of antibacterial organics
- Nonionic surfactants adsorption onto activated carbon. Influence of the polar chain length
- On the constancy of the free energy reduction caused by imbibition in porous media
- On the evaluation of the surface free energy of porous and powdered solids from imbibition experiments: Equivalence between height-time and weight-time techniques
- On the interactions of human bone cells with Ti6Al4V thermally oxidized by means of laser shock processing
- On the relationship between common amplitude surface roughness parameters and surface area: Implications for the study of cell-material interactions
- On the role of RhoA/ROCK signaling in contact guidance of bone-forming cells on anisotropic Ti6Al4V surfaces
- On the use of RMS roughness for surface roughness characterization
- On the use of Washburn's equation in the analysis of weight-time measurements obtained from imbibition experiments
- Optical interference artifacts in contact atomic force microscopy images
- PLA-Mg film degradation under in vitro environments supplemented with glucose and/or ketone bodies
- Per-6-O-(tert-butyldimethylsilyl)cyclodextrins (TBDMS-CDs) in langmuir monolayers: the importance of a spreading solvent in the preparation of LB layers suitable for sensor application
- Power Technology: Preface
- Prediction of aqueous solution surface tension of some surfactant mixtures and composition of their monolayers at the solution–air interface
- Properties of decylammonium chloride and cesium perfluorooctanoate at interfaces and standard free energy of their adsorption
- Quantification of electronic activity inside photo-activated TiO<inf>2</inf> layers through a new electrical model supported by electrokinetic data
- Quantitative surface roughness determination of materials by AFM: Some limitations
- Quercitrin-nanocoated titanium surfaces favour gingival cells against oral bacteria
- Relationship between heat of immersion and surface Gibbs energy of fluorite and cassiterite
- Relevance of Topographic Parameters on the Adhesion and Proliferation of Human Gingival Fibroblasts and Oral Bacterial Strains
- Removal of an ionic surfactant from wastewater by carbon blacks adsorption
- Sensitivity of surface roughness parameters to changes in the density of scanning points in multi-scale AFM studies. Application to a biomaterial surface
- Serum as a factor influencing adhesion of Enterococcus faecalis to glass and silicone
- Si+ ion implantation reduces the bacterial accumulation on the Ti6Al4V surface
- Solar radiation map of extremadura from other weather data
- Some geometrical considerations about the influence of topography on the adhesion force as measured by AFM on curved surfaces
- Structure, morphology, adhesion and in vitro biological evaluation of antibacterial multi-layer HA-Ag/SiO<inf>2</inf>/TiN/Ti coatings obtained by RF magnetron sputtering for biomedical applications
- Studying the influence of surface topography on bacterial adhesion using spatially organized microtopographic surface patterns
- Surface and thermodynamic properties of sodium dodecyl sulphate and sodium dodecyl sulphonate
- Surface characterisation of two strains of Staphylococcus epidermidis with different slime-production by AFM
- Surface characterisation of human serum albumin layers on activated ti6al4v
- Surface morphological characterization of yeast cells by scanning force microscopy
- Surface topographical changes of a failing acid-etched long-term in function retrieved dental implant
- Surface-dependent mechanical stability of adsorbed human plasma fibronectin on Ti6Al4V: Domain unfolding and stepwise unraveling of single compact molecules
- Temperature influence on the physicochemical surface properties and adhesion behaviour of Enterococcus faecalis to glass and silicone
- The Adsorption of Triton X-100 at the Air-Aqueous Solution Interface
- The Influence of sodium dodecyl sulfate on the surface free energy of cassiterite
- The Relationship between the Interfacial Free Energy and the Free Energy of Micellization of Triton X-100 and Sodium Dodecyl Sulfonate
- The adhesion strength of Candida parapsilosis to glass and silicone as a function of hydrophobicity, roughness and cell morphology
- The adsorption of sodium dodecyl sulphate on fluorite and its surface free energy
- The contribution of double layers to the free energy of interactions in the cassiterite-SDS solution system
- The critical micelle concentration of alkylammonium chlorides, sodium alkyl sulphates and sulphonates and their surface free energy
- The effects of urine and temperature on the physicochemical surface properties and adhesion behaviour of uropathogenic bacteria
- The influence of mixture anionic and non-ionic surfactants on the surface free energy of cassiterite
- The influence of oleate adsorption at the fluorite/water interface on fluorite surface free energy
- The measurement temperature: An important factor relating physicochemical and adhesive properties of yeast cells to biomaterials
- The mechanism of adsorption of sodium dodecylsulfonate on fluorite and its surface free energy
- The properties of mixtures of ionic and nonionic surfactants in water at the water/air interface
- The role of fibronectin binding protein on the staphylococcal adhesion to the Ti6Al4V surface
- The role of magnesium in biomaterials related infections
- The surface free energy of fluorite in presence of sodium dodecyl sulfate
- The usefulness of the equation of state for interfacial tensions estimation in some liquid-liquid and solid-liquid systems
- The volumetric properties of mixtures of N-alkyl ammonium chlorides and sodium dodecyl sulphate
- The zeta potential of extended dielectrics and conductors in terms of streaming potential and streaming current measurements
- Thermodynamic Characterization of Rhamnolipid, Triton X-165 and Ethanol as well as Their Mixture Behaviour at the Water-Air Interface
- Thermodynamic analysis of growth temperature dependence in the adhesion of Candida parapsilosis to polystyrene
- Thermodynamic characterization of a regenerated activated carbon surface
- Three-dimensional and chemical changes on the surface of a 3-year clinically retrieved oxidized titanium dental implant
- UV light irradiation of Ti6Al4V: Physico-chemistry of the initial bacterial adhesion and further retention
- UV light irradiation of Ti6Al4V: Antibacterial impact and biocompatibility in Vitro
- Ultrasmall liquid droplets on solid surfaces: Production, imaging, and relevance for current wetting research
- Ultrastructural and physico-chemical heterogeneities of yeast surfaces revealed by mapping lateral-friction and normal-adhesion forces using an atomic force microscope
- Volumetric properties of the decylammonium chloride and cesium perfluorooctanoate from density measurements
- Washburn's equation facing Galileo's transformation: Some remarks
- Wettability and surface tension of fluorite
- Wettability and surface free energy of zirconia ceramics and their constituents
- Wettability of cassiterite in presence of sodium dodecyl sulphate
- Wettability of fluorite in the presence of an anionic and a non-ionic surfactant
- Wetting of cassiterite by sodium dodecyl sulphate solutions
- XPS Analysis of Ti6Al4V Oxidation Under UHV Conditions
- Zeta potential aspects of dispersed solvents involved in the determination of microbial cell surface hydrophobicity
- p-Nitrophenol Adsorption from Aqueous Solution on Carbon Black. Temperature Effect
- ou:perteneceAGrupoInvestigacion
- ou:adscritoACentro
- ou:adscritoADepartamento
- ou:imparteDocenciaEnArea
Inverse Relations
Inverse Blank Nodes
