PUBLICACIÓN

Elastic Modulus of Woven Bone: Correlation with Evolution of Porosity and X-ray Greyscale

ACCEDER A LA PUBLICACIÓN: Scopus Orcid

Mora-Macias, J., Garcia-Florencio, P., Pajares, A., Miranda, P., Dominguez, J., Reina-Romo, E.

2021 ANNALS OF BIOMEDICAL ENGINEERING

Biomedical Engineering (Q2)

JCR: 4.219

SJR: 0.865

CITAS

3

DOI

10.1007/s10439-020-02529-6

EID

2-s2.0-85084372836

ISSN

0090-6964

EISSN

1573-9686

AUTORES DE LA UEX

Pedro Miranda González
Antonia Pajares Vicente

OTRAS PUBLICACIONES DE INTERÉS

Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Bioinspired Composite Segmented Armour: Numerical Simulations
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Bioinspired Composite Segmented Armour: Numerical Simulations
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Bioinspired Composite Segmented Armour: Numerical Simulations
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Mechanics Of Microwear Traces In Tooth Enamel
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Mechanics Of Microwear Traces In Tooth Enamel
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Mechanics Of Microwear Traces In Tooth Enamel
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
A Model For Predicting Wear Rates In Tooth Enamel
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
A Model For Predicting Wear Rates In Tooth Enamel
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
A Model For Predicting Wear Rates In Tooth Enamel
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Preparation Of Porous Hydroxyapatite Scaffolds
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Preparation Of Porous Hydroxyapatite Scaffolds
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Preparation Of Porous Hydroxyapatite Scaffolds
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Fabrication Of Porous Hydroxyapatite Scaffolds
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Fabrication Of Porous Hydroxyapatite Scaffolds
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
Fabrication Of Porous Hydroxyapatite Scaffolds
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
An Improved Correlation Between Impression And Uniaxial Creep
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
An Improved Correlation Between Impression And Uniaxial Creep
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
An Improved Correlation Between Impression And Uniaxial Creep
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Master Curves For Hertzian Indentation On Coating/substrate Systems
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Master Curves For Hertzian Indentation On Coating/substrate Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Master Curves For Hertzian Indentation On Coating/substrate Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Strength Of Silicon Containing Nanoscale Flaws
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Strength Of Silicon Containing Nanoscale Flaws
Materials Design In The Performance Of All-Ceramic Crowns
Strength Of Silicon Containing Nanoscale Flaws
Materials Design In The Performance Of All-Ceramic Crowns
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Materials Design In The Performance Of All-Ceramic Crowns
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Cracking In Ceramic/metal/polymer Trilayer Systems
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Cracking In Ceramic/metal/polymer Trilayer Systems
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
Cracking In Ceramic/metal/polymer Trilayer Systems
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Damage-Resistant Brittle Coatings
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Damage-Resistant Brittle Coatings
Damage-Resistant Brittle Coatings
Damage-Resistant Brittle Coatings
Damage-Resistant Brittle Coatings
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Damage-Resistant Brittle Coatings
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Residual Stresses Around Vickers Indents
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
Tem Characterization Of Indented Polycrystalline Y-Psz
Measurement Of Fiber Orientation In Short-Fiber Composites
Tem Characterization Of Indented Polycrystalline Y-Psz
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Tem Characterization Of Indented Polycrystalline Y-Psz
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
WEB ACCESIBLE