PUBLICACIÓN

Understanding the role of dip-coating process parameters in the mechanical performance of polymer-coated bioglass robocast scaffolds

ACCEDER A LA PUBLICACIÓN: Scopus Orcid

Motealleh A.; Eqtesadi S.; Perera F.H.; Pajares A.; Guiberteau F.; Miranda P.

2016 Journal of the Mechanical Behavior of Biomedical Materials

Biomaterials (Q2), Biomedical Engineering (Q1), Mechanics of Materials (Q1)

JCR: 3.11

SJR: 0.917

CITAS

38

DOI

10.1016/j.jmbbm.2016.08.004

EID

2-s2.0-84981302927

ISSN

1751-6161

EISSN

1878-0180

AUTORES DE LA UEX

Pedro Miranda González
Antonia Pajares Vicente
Fernando Guiberteau Cabanillas

OTRAS PUBLICACIONES DE INTERÉS

Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Predicción De Las Propiedades Mecánicas Del Tejido Óseo Inmaduro Según Su Microestructura Y Composición
Improving The Mechanical Performance Of Porous Ice-Templated Bioactive Scaffolds Through The Incorporation Of Additively Manufactured Reinforcement Frames
Predicción De Las Propiedades Mecánicas Del Tejido Óseo Inmaduro Según Su Microestructura Y Composición
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
Predicción De Las Propiedades Mecánicas Del Tejido Óseo Inmaduro Según Su Microestructura Y Composición
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Fabrication And Characterization Of 3d-Printed Antibacterial Bioactive Glass /polycaprolactone Nanocomposite Scaffolds
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Improving The Strength Of Β-Tcp Scaffolds Produced By Digital Light Processing Using Two-Step Sintering
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
The Oxidation Of Zrb2/mosi2 Ceramics In Dissociated Air: The Influence Of The Elaboration Technique
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
Novel B4c Supports For Ceramic Membrane Filtration
On The Suitability Of Photocuring-Assisted Diw For Manufacturing Complex Prosthesis From Commercial Dental Composites
Novel B4c Supports For Ceramic Membrane Filtration
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
Novel B4c Supports For Ceramic Membrane Filtration
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
On The Influence Of Structural And Chemical Properties On The Elastic Modulus Of Woven Bone Under Healing
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Evaluating The Suitability Of Fast Sintering Techniques For The Consolidation Of Calcium Phosphate Scaffolds Produced By Dlp
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Applicability Of Near-Field Electrospinning For The Development Of Tcp-Based Thin Fibres And Scaffold 3d Printing
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Impact Of Residual Carbon After Dlp And Sps-Sintering On Compressive Strength And In-Vitro Bioactivity Of Calcium Phosphate Scaffolds
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Co-Continuous Calcium Phosphate/polycaprolactone Composite Bone Scaffolds Fabricated By Digital Light Processing And Polymer Melt Suction
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Using Ductile Cores For Enhancing The Mechanical Performance Of Hollow Strut Β-Tcp Scaffolds Fabricated By Digital Light Processing
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Evaluation Of Direct Light Processing For The Fabrication Of Bioactive Ceramic Scaffolds: Effect Of Pore/strut Size On Manufacturability And Mechanical Performance
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Prefabricated 3d-Printed Tissue-Engineered Bone For Mandibular Reconstruction: A Preclinical Translational Study In Primate
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Bioinspired Channeled, Rhbmp-2-Coated Β-Tcp Scaffolds With Embedded Autologous Vascular Bundles For Increased Vascularization And Osteogenesis Of Prefabricated Tissue-Engineered Bone
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Elastic Modulus Of Woven Bone: Correlation With Evolution Of Porosity And X-Ray Greyscale
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Development By Robocasting And Mechanical Characterization Of Hybrid Ha/pcl Coaxial Scaffolds For Biomedical Applications
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Novel Strategy For Toughening Robocast Bioceramic Scaffolds Using Polymeric Cores
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Bioceramic Scaffolds Fabrication: Indirect 3d Printing Combined With Ice-Templating Vs. Robocasting
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Wear Of Ceramic-Based Dental Materials
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Wear Of Ceramic-Based Dental Materials
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Wear Of Ceramic-Based Dental Materials
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Bioinspired Composite Segmented Armour: Numerical Simulations
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Bioinspired Composite Segmented Armour: Numerical Simulations
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Bioinspired Composite Segmented Armour: Numerical Simulations
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
A Simple Graphite-Based Support Material For Robocasting Of Ceramic Parts
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Enhancing The Mechanical And In Vitro Performance Of Robocast Bioglass Scaffolds By Polymeric Coatings: Effect Of Polymer Composition
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Effect Of The Drying Process On The Compressive Strength And Cell Proliferation Of Hydroxyapatite-Derived Scaffolds
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Case Study: Reinforcement Of 45s5 Bioglass Robocast Scaffolds By Ha/pcl Nanocomposite Coatings
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Mechanical Characterization Via Nanoindentation Of The Woven Bone Developed During Bone Transport
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Robocast 45s5 Bioglass Scaffolds: In Vitro Behavior
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Biphasic Calcium Phosphate Scaffolds Fabricated By Direct Write Assembly: Mechanical, Anti-Microbial And Osteoblastic Properties
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Simulation Of Enamel Wear For Reconstruction Of Diet And Feeding Behavior In Fossil Animals: A Micromechanics Approach
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Poly-(Lactic Acid) Infiltration Of 45s5 Bioglass® Robocast Scaffolds: Chemical Interaction And Its Deleterious Effect In Mechanical Enhancement
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Two Different Techniques Used In The Production Of Foam Structures: 3d Printing And Glass Foaming
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Mechanics Of Microwear Traces In Tooth Enamel
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Mechanics Of Microwear Traces In Tooth Enamel
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Mechanics Of Microwear Traces In Tooth Enamel
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Effect Of Milling Media On Processing And Performance Of 13-93 Bioactive Glass Scaffolds Fabricated By Robocasting
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
The Compelling Case For Indentation As A Functional Exploratory And Characterization Tool
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
A Model For Predicting Wear Rates In Tooth Enamel
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
A Model For Predicting Wear Rates In Tooth Enamel
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
A Model For Predicting Wear Rates In Tooth Enamel
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
Robocasting Of 45s5 Bioactive Glass Scaffolds For Bone Tissue Engineering
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Impregnation Of Β-Tricalcium Phosphate Robocast Scaffolds By In Situ Polymerization
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
A Simple Recipe For Direct Writing Complex 45s5 Bioglass® 3d Scaffolds
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
The Prolific Polytypism Of Silicon Carbide
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Label-Free Magnetic Resonance Imaging To Locate Live Cells In Three-Dimensional Porous Scaffolds
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Biological Properties Of Solid Free Form Designed Ceramic Scaffolds With Bmp-2: In Vitro And In Vivo Evaluation
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
Strength Of Aluminium Titanate/mullite Composites Containing Thermal Stabilizers
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Preparation Of Porous Hydroxyapatite Scaffolds
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Preparation Of Porous Hydroxyapatite Scaffolds
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Preparation Of Porous Hydroxyapatite Scaffolds
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Fabrication Of Porous Hydroxyapatite Scaffolds
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Fabrication Of Porous Hydroxyapatite Scaffolds
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
Fabrication Of Porous Hydroxyapatite Scaffolds
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
An Improved Correlation Between Impression And Uniaxial Creep
Sintering And Robocasting Of Β-Tricalcium Phosphate Scaffolds For Orthopaedic Applications
An Improved Correlation Between Impression And Uniaxial Creep
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
An Improved Correlation Between Impression And Uniaxial Creep
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Master Curves For Hertzian Indentation On Coating/substrate Systems
Combined Empirical-Analytical Method For Determining Contact Radius And Indenter Displacement During Hertzian Indentation On Coating/substrate Systems
Master Curves For Hertzian Indentation On Coating/substrate Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Master Curves For Hertzian Indentation On Coating/substrate Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Effect Of Oxide And Nitride Films On Strength Of Silicon: A Study Using Controlled Small-Scale Flaws
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Fatigue And Damage Tolerance Of Y-Tzp Ceramics In Layered Biomechanical Systems
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Strength Of Silicon Containing Nanoscale Flaws
Strength Of Silicon, Sapphire And Glass In The Subthreshold Flaw Region
Strength Of Silicon Containing Nanoscale Flaws
Materials Design In The Performance Of All-Ceramic Crowns
Strength Of Silicon Containing Nanoscale Flaws
Materials Design In The Performance Of All-Ceramic Crowns
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
Materials Design In The Performance Of All-Ceramic Crowns
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Effect Of An Adhesive Interlayer On The Fracture Of A Brittle Coating On A Supporting Substrate
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Modeling Of Contact-Induced Radial Cracking In Ceramic Bilayer Coatings On Compliant Substrates
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Cracking In Ceramic/metal/polymer Trilayer Systems
Overview: Damage In Brittle Layer Structures From Concentrated Loads
Cracking In Ceramic/metal/polymer Trilayer Systems
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
Cracking In Ceramic/metal/polymer Trilayer Systems
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Rate Effects In Critical Loads For Radial Cracking In Ceramic Coatings
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Effect Of Flaw State On The Strength Of Brittle Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Damage-Resistant Brittle Coatings
Mechanical Properties Of Cork Under Contact Stresses
Damage-Resistant Brittle Coatings
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Damage-Resistant Brittle Coatings
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Damage-Resistant Brittle Coatings
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Damage-Resistant Brittle Coatings
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Damage-Resistant Brittle Coatings
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
Contact Damage Resistance And Strength Degradation Of Glass-Infiltrated Alumina And Spinel Ceramics
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
Mechanical Characterization Of Dental Ceramics By Hertzian Contacts
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Effect Of Substrate And Bond Coat On Contact Damage In Zirconia-Based Plasma-Sprayed Coatings
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Mechanical Characterization Of Plasma Sprayed Ceramic Coatings On Metal Substrates By Contact Testing
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Stress Analysis Of Elastic-Plastic Contact Damage In Ceramic Coatings On Metal Substrates
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Contact Damage In Plasma-Sprayed Alumina-Based Coatings
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Effect Of Mechanical Damage On Thermal Conduction Of Plasma-Sprayed Coatings
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Damage Accumulation And Cyclic Fatigue In Mg-Psz At Hertzian Contacts
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Residual Stresses Around Vickers Indents
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Measurement Of Fiber Orientation In Short-Fiber Composites
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Effect Of Grain Size On Hertzian Contact Damage In Alumina
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Effect Of Grain Size On Hertzian Contact Damage In Alumina
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Effect Of Grain Size On Hertzian Contact Damage In Alumina
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Making Ceramics Ductile
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Making Ceramics Ductile
Tem Characterization Of Indented Polycrystalline Y-Psz
Making Ceramics Ductile
Tem Characterization Of Indented Polycrystalline Y-Psz
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Tem Characterization Of Indented Polycrystalline Y-Psz
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Indentation Fatigue
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Indentation Fatigue
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation Fatigue
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
Diffusion And Deformation Maps In Co O
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
Diffusion And Deformation Maps In Co O
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Diffusion And Deformation Maps In Co O
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
The Impact Of Cyclic Oxidation In Dissociated Air On The Mechanical Properties Of Freeze-Cast Zrb2/mosi2 Ceramics
WEB ACCESIBLE