PUBLICACIÓN

Microstructural characterization of Y-PSZ (4 mol%) polycrystals by means of X-ray diffraction experiments

ACCEDER A LA PUBLICACIÓN: Scopus

Sánchez-Bajo F.

1992 Materials Letters

CITAS

18

DOI

10.1016/0167-577x(92)90009-9

EID

2-s2.0-0026941251

ISSN

0167-577X

AUTORES DE LA UEX

Fernando Guiberteau Cabanillas
Florentino Sánchez Bajo

OTRAS PUBLICACIONES DE INTERÉS

Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
On The Split Voigt Profile And Its Use In The Analysis Of X-Ray Diffraction Patterns
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
On The Split Voigt Profile And Its Use In The Analysis Of X-Ray Diffraction Patterns
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
On The Split Voigt Profile And Its Use In The Analysis Of X-Ray Diffraction Patterns
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Investigating Correlations Between Translucency And Wear Resistance In Lithium Silicate-Based Dental Glass-Ceramics
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Fitting X-Ray Diffraction Peaks By A Genetic Algorithm And Monte Carlo Markov Chain Procedure
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Fitting X-Ray Diffraction Peaks By A Genetic Algorithm And Monte Carlo Markov Chain Procedure
Novel B4c Supports For Ceramic Membrane Filtration
Fitting X-Ray Diffraction Peaks By A Genetic Algorithm And Monte Carlo Markov Chain Procedure
Novel B4c Supports For Ceramic Membrane Filtration
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Novel B4c Supports For Ceramic Membrane Filtration
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Desconchado De Materiales Dentales. Efectos De Terceras Partículas De Tamaño Micrométrico
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Sol–gel Method And Reactive Sps For Novel Alumina–graphene Ceramic Composites
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Sol–gel Method And Reactive Sps For Novel Alumina–graphene Ceramic Composites
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Sol–gel Method And Reactive Sps For Novel Alumina–graphene Ceramic Composites
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Chipping Of Ceramic-Based Dental Materials By Micrometric Particles
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
On The Durability Of Zirconia-Reinforced Lithium Silicate And Lithium Disilicate Dental Ceramics Under Severe Contact
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Effects Of The Test Method On Wear Measurements In Dental Enamel/ceramic Tribosystems
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Reactive Sps For Sol–gel Alumina Samples: Structure, Sintering Behavior, And Mechanical Properties
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Reactive Sps For Sol–gel Alumina Samples: Structure, Sintering Behavior, And Mechanical Properties
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Reactive Sps For Sol–gel Alumina Samples: Structure, Sintering Behavior, And Mechanical Properties
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Novel Bioinspired Composites Fabricated By Robocasting For Dental Applications
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Soonspot: Software To Determine Areas And Sunspot Positions
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Soonspot: Software To Determine Areas And Sunspot Positions
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Soonspot: Software To Determine Areas And Sunspot Positions
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Inverse Correlations Between Wear And Mechanical Properties In Biphasic Dental Materials With Ceramic Constituents
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Contact Damage Of Human Dental Enamel Under Cyclic Axial Loading With Abrasive Particles
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Sunspot Characteristics At The Onset Of The Maunder Minimum Based On The Observations Of Hevelius
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Sunspot Characteristics At The Onset Of The Maunder Minimum Based On The Observations Of Hevelius
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Sunspot Characteristics At The Onset Of The Maunder Minimum Based On The Observations Of Hevelius
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Desgaste Del Esmalte Dental Humano A Escalas Micro Y Macroscópica
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Wear Of Ceramic-Based Dental Materials
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Wear Of Ceramic-Based Dental Materials
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Wear Of Ceramic-Based Dental Materials
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Elucidating The Role Of 45s5 Bioglass Content In The Density And Flexural Strength Of Robocast Β-Tcp/45s5 Composites
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
A Small Collection Of Sunspot Drawings Made In The Royal Astronomical Observatory Of The Spanish Navy In 1884
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
A Small Collection Of Sunspot Drawings Made In The Royal Astronomical Observatory Of The Spanish Navy In 1884
A Normalized Sunspot-Area Series Starting In 1832: An Update
A Small Collection Of Sunspot Drawings Made In The Royal Astronomical Observatory Of The Spanish Navy In 1884
A Normalized Sunspot-Area Series Starting In 1832: An Update
Determining Sunspot Positions In The Classroom Using The Carrington Method
A Normalized Sunspot-Area Series Starting In 1832: An Update
Determining Sunspot Positions In The Classroom Using The Carrington Method
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Determining Sunspot Positions In The Classroom Using The Carrington Method
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Understanding The Role Of Dip-Coating Process Parameters In The Mechanical Performance Of Polymer-Coated Bioglass Robocast Scaffolds
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Improving Mechanical Properties Of 13-93 Bioactive Glass Robocast Scaffold By Poly (Lactic Acid) And Poly (Ε-Caprolactone) Melt Infiltration
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Microstructural Study Of Sno2-Based Nanoparticles By X-Ray Diffractometry
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Microstructural Study Of Sno2-Based Nanoparticles By X-Ray Diffractometry
Deconvolution Of X-Ray Diffraction Profiles Using Genetic Algorithms And Differential Evolution
Microstructural Study Of Sno2-Based Nanoparticles By X-Ray Diffractometry
Deconvolution Of X-Ray Diffraction Profiles Using Genetic Algorithms And Differential Evolution
Sunspot Latitudes During The Maunder Minimum: A Machine-Readable Catalogue From Previous Studies
Deconvolution Of X-Ray Diffraction Profiles Using Genetic Algorithms And Differential Evolution
Sunspot Latitudes During The Maunder Minimum: A Machine-Readable Catalogue From Previous Studies
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Sunspot Latitudes During The Maunder Minimum: A Machine-Readable Catalogue From Previous Studies
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Influence Of Sintering Temperature On The Mechanical Properties Of Ε-Pcl-Impregnated 45s5 Bioglass-Derived Scaffolds Fabricated By Robocasting
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Effect Of Polymer Infiltration On The Flexural Behavior Of Β-Tricalcium Phosphate Robocast Scaffolds
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Measuring Solar Rotation From Digital Camera Images
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Measuring Solar Rotation From Digital Camera Images
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Measuring Solar Rotation From Digital Camera Images
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Reinforcing Bioceramic Scaffolds With In Situ Synthesized Ε-Polycaprolactone Coatings
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
La Determinación De La Transparencia Atmosférica: Una Propuesta Educativa.
The Prolific Polytypism Of Silicon Carbide
La Determinación De La Transparencia Atmosférica: Una Propuesta Educativa.
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
La Determinación De La Transparencia Atmosférica: Una Propuesta Educativa.
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
On The Estimation Of Atmospheric Aerosol Extinction Parameters From Measurements In The Johnsoncousins Photometric System
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
On The Estimation Of Atmospheric Aerosol Extinction Parameters From Measurements In The Johnsoncousins Photometric System
Hsunspots: A Tool For The Analysis Of Historical Sunspot Drawings
On The Estimation Of Atmospheric Aerosol Extinction Parameters From Measurements In The Johnsoncousins Photometric System
Hsunspots: A Tool For The Analysis Of Historical Sunspot Drawings
Teaching Nonlinear Dynamics Through Elastic Cords
Hsunspots: A Tool For The Analysis Of Historical Sunspot Drawings
Teaching Nonlinear Dynamics Through Elastic Cords
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Teaching Nonlinear Dynamics Through Elastic Cords
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Effect Of Microstructure On The Mechanical Properties Of Liquid-Phase-Sintered Silicon Carbide At Pre-Creep Temperatures
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Solar Rotation During The Period 1847 - 1849
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Solar Rotation During The Period 1847 - 1849
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Solar Rotation During The Period 1847 - 1849
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Improving The Compressive Strength Of Bioceramic Robocast Scaffolds By Polymer Infiltration
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
Effect Of Temperature On The Pre-Creep Mechanical Properties Of Silicon Nitride
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
A Constant Period For The W Uma Star Bh Cas
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
A Constant Period For The W Uma Star Bh Cas
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
A Constant Period For The W Uma Star Bh Cas
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Mechanical Properties Of Calcium Phosphate Scaffolds Fabricated By Robocasting
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Peaks Detection In X-Ray Diffraction Profiles Using Grid Computing
Finite Element Modeling As A Tool For Predicting The Fracture Behavior Of Robocast Scaffolds
Peaks Detection In X-Ray Diffraction Profiles Using Grid Computing
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Peaks Detection In X-Ray Diffraction Profiles Using Grid Computing
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Contact Properties Of Yttria Partially Stabilized Zirconia Up To 1000°c
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Temperature Dependence Of Mechanical Properties Of Alumina Up To The Onset Of Creep
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Application Of Hertzian Tests To Measure Stress-Strain Characteristics Of Ceramics At Elevated Temperatures
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Photometric Study Of The W Uma Eclipsing Binaries Vw Lmi And Bx Dra
Fracture Modes Under Uniaxial Compression In Hydroxyapatite Scaffolds Fabricated By Robocasting
Photometric Study Of The W Uma Eclipsing Binaries Vw Lmi And Bx Dra
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Photometric Study Of The W Uma Eclipsing Binaries Vw Lmi And Bx Dra
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Improving Sunspot Records: The Observations By M. Hell Revisited
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Improving Sunspot Records: The Observations By M. Hell Revisited
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Improving Sunspot Records: The Observations By M. Hell Revisited
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Variable Stars In The Classroom
Mechanical Behaviour Under Uniaxial Compression Of Robocast Calcium Phosphate Scaffolds
Variable Stars In The Classroom
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Variable Stars In The Classroom
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
The Phemu97 Catalogue Of Observations Of The Mutual Phenomena Of The Galilean Satellites Of Jupiter
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
The Phemu97 Catalogue Of Observations Of The Mutual Phenomena Of The Galilean Satellites Of Jupiter
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
The Phemu97 Catalogue Of Observations Of The Mutual Phenomena Of The Galilean Satellites Of Jupiter
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
A New Reconstruction Of Total Solar Irradiance Since 1832
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
A New Reconstruction Of Total Solar Irradiance Since 1832
A New Reconstruction Of Total Solar Irradiance Since 1832
A New Reconstruction Of Total Solar Irradiance Since 1832
A New Reconstruction Of Total Solar Irradiance Since 1832
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
A New Reconstruction Of Total Solar Irradiance Since 1832
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Propiedades Mecánicas De Cerámicos A Termperaturas Intermedias
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Obtención De Vidrios De Aluminato Sodocálcico A Partir De Residuos De Granito
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
The Umbra-Penumbra Area Ratio Of Sunspots From The De La Rue Data
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
The Umbra-Penumbra Area Ratio Of Sunspots From The De La Rue Data
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
The Umbra-Penumbra Area Ratio Of Sunspots From The De La Rue Data
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Thermal Stability Of Sol-Gel Derived 6 Mole%cao-Zro2 Ceramics
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Thermal Stability Of Sol-Gel Derived 6 Mole%cao-Zro2 Ceramics
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
Thermal Stability Of Sol-Gel Derived 6 Mole%cao-Zro2 Ceramics
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
Reconstruction Of A Monthly Homogeneous Sunspot Area Series Since 1832
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
Reconstruction Of A Monthly Homogeneous Sunspot Area Series Since 1832
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Reconstruction Of A Monthly Homogeneous Sunspot Area Series Since 1832
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Fracture Of Ceramic/ceramic/polymer Trilayers For Biomechanical Applications
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
Designing Damage-Resistant Brittle-Coating Structures: Ii. Trilayers
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
The Detached Eclipsing Binary System Gx Geminorum
Designing Damage-Resistant Brittle-Coating Structures: I. Bilayers
The Detached Eclipsing Binary System Gx Geminorum
Photometric Study Of The Binary System Nn Del
The Detached Eclipsing Binary System Gx Geminorum
Photometric Study Of The Binary System Nn Del
Periodicities Of The De La Rue Sunspot Area Measurements
Photometric Study Of The Binary System Nn Del
Periodicities Of The De La Rue Sunspot Area Measurements
Superplastic Junction Of Y-Tzp Smaples: Electrical Behaviour
Periodicities Of The De La Rue Sunspot Area Measurements
Superplastic Junction Of Y-Tzp Smaples: Electrical Behaviour
Measurements Of Atmospheric Extinction At A Ground Level Observatory
Superplastic Junction Of Y-Tzp Smaples: Electrical Behaviour
Measurements Of Atmospheric Extinction At A Ground Level Observatory
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Measurements Of Atmospheric Extinction At A Ground Level Observatory
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Measuring Solar Limb-Darkening With Modest Equipment
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Measuring Solar Limb-Darkening With Modest Equipment
On The Reliability Of The De La Rue Sunspot Area Measurements
Measuring Solar Limb-Darkening With Modest Equipment
On The Reliability Of The De La Rue Sunspot Area Measurements
A Measure Of The Solar Rotation During The Maunder Minimum
On The Reliability Of The De La Rue Sunspot Area Measurements
A Measure Of The Solar Rotation During The Maunder Minimum
Robustness In The Suppression Of Bidirectional Chaotic Escape From A Potential Well By Weak Parametric Excitations
A Measure Of The Solar Rotation During The Maunder Minimum
Robustness In The Suppression Of Bidirectional Chaotic Escape From A Potential Well By Weak Parametric Excitations
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Robustness In The Suppression Of Bidirectional Chaotic Escape From A Potential Well By Weak Parametric Excitations
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Mechanical Characterization Of Materials For Dental Applications
Role Of Flaw Statistics In Contact Fracture Of Brittle Coatings
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Mechanical Characterization Of Materials For Dental Applications
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
Contact Fracture Of Brittle Bilayer Coatings On Soft Substrates
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
On The Transformation Toughening Of Y-Zro2 Ceramics With Mixed Y-Tzp/psz Microstructures
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
On The Transformation Toughening Of Y-Zro2 Ceramics With Mixed Y-Tzp/psz Microstructures
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
On The Transformation Toughening Of Y-Zro2 Ceramics With Mixed Y-Tzp/psz Microstructures
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Atmospheric Extinction Of Stellar Radiation In The Optical Domain
Mechanical Properties Of Cork Under Contact Stresses
Atmospheric Extinction Of Stellar Radiation In The Optical Domain
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Atmospheric Extinction Of Stellar Radiation In The Optical Domain
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Deconvolution Of X-Ray Diffraction Profiles By Using Series Expansion
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Deconvolution Of X-Ray Diffraction Profiles By Using Series Expansion
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
Deconvolution Of X-Ray Diffraction Profiles By Using Series Expansion
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
A Gaussian-Hermite Polynomials Function For X-Ray Diffraction Profile Fitting
Joining Of Yttria-Tetragonal Stabilized Zirconia Polycrystals Using Nanocrystals
A Gaussian-Hermite Polynomials Function For X-Ray Diffraction Profile Fitting
Respuesta Eléctrica De Nanocristales Zro2-3mol% Y2o3
A Gaussian-Hermite Polynomials Function For X-Ray Diffraction Profile Fitting
Respuesta Eléctrica De Nanocristales Zro2-3mol% Y2o3
A Strange Attractor On A Daily Timescale In The Visual Observations Of Z And?
Respuesta Eléctrica De Nanocristales Zro2-3mol% Y2o3
A Strange Attractor On A Daily Timescale In The Visual Observations Of Z And?
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
A Strange Attractor On A Daily Timescale In The Visual Observations Of Z And?
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Heterogeneous Junction Of Yttria Partially Stabilized Zirconia By Superplastic Flow
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Phase Assemblage Effects On The Fracture And Fatigue Characteristics Of Magnesia-Partially Stabilized Zirconia
X-Ray Microstructural Characterization Of Y-Psz (5 Mol%) Nanocrystalline Powder Samples
Phase Assemblage Effects On The Fracture And Fatigue Characteristics Of Magnesia-Partially Stabilized Zirconia
Microstructure Effects In The X-Ray Powder Diffraction Profile Of 9 Mol% Mg-Psz
Phase Assemblage Effects On The Fracture And Fatigue Characteristics Of Magnesia-Partially Stabilized Zirconia
Microstructure Effects In The X-Ray Powder Diffraction Profile Of 9 Mol% Mg-Psz
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis
Microstructure Effects In The X-Ray Powder Diffraction Profile Of 9 Mol% Mg-Psz
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis. Erratum
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis. Erratum
Nonlinear And Chaotic Oscillations Of An India-Rubber Band
The Use Of The Pseudo-Voigt Function In The Variance Method Of X-Ray Line-Broadening Analysis. Erratum
Nonlinear And Chaotic Oscillations Of An India-Rubber Band
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Nonlinear And Chaotic Oscillations Of An India-Rubber Band
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Differentiation Between Pseudocubic And Cubic Phases In Y-Zro2 Using Rietveld Analysis
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Analysis Of Kidney-Shaped Indentation Cracks In 4y-Psz
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
Hertzian Contact Damage In Magnesia‐partially‐stabilized Zirconia
Residual Stresses Around Vickers Indents
The Use Of The Jmayk Kinetic Equation For The Analysis Of Solid-State Reactions: Critical Considerations And Recent Interpretations
Residual Stresses Around Vickers Indents
The Use Of The Jmayk Kinetic Equation For The Analysis Of Solid-State Reactions: Critical Considerations And Recent Interpretations
Espectroscopía De Impedancia De Monocristales 4.7 Mol% Y-Psz
The Use Of The Jmayk Kinetic Equation For The Analysis Of Solid-State Reactions: Critical Considerations And Recent Interpretations
Espectroscopía De Impedancia De Monocristales 4.7 Mol% Y-Psz
Caracterización Microestructural Del Sistema Y-Psz
Espectroscopía De Impedancia De Monocristales 4.7 Mol% Y-Psz
Caracterización Microestructural Del Sistema Y-Psz
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Caracterización Microestructural Del Sistema Y-Psz
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Indentation Studies On Y2o2‐stabilized Zro2: I, Development Of Indentation‐induced Cracks
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
Indentation Studies On Y2o3‐stabilized Zro2: Ii, Toughness Determination From Stable Growth Of Indentation‐induced Cracks
Measurement Of Fiber Orientation In Short-Fiber Composites
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Measurement Of Fiber Orientation In Short-Fiber Composites
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Effect Of Grain Size On Hertzian Contact Damage In Alumina
X-Ray Berg-Barrett Topography Of The Deformation Substructure Of Stabilized Zirconium Oxide Single Crystals Deformed At 1673 K
Effect Of Grain Size On Hertzian Contact Damage In Alumina
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Effect Of Grain Size On Hertzian Contact Damage In Alumina
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Making Ceramics Ductile
A Model For Microcrack Initiation And Propagation Beneath Hertzian Contacts In Polycrystalline Ceramics
Making Ceramics Ductile
Tem Characterization Of Indented Polycrystalline Y-Psz
Making Ceramics Ductile
Tem Characterization Of Indented Polycrystalline Y-Psz
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Tem Characterization Of Indented Polycrystalline Y-Psz
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Indentation Fatigue
The Williams-Watts Dependence As A Common Phenomenological Approach To Relaxation Processes In Condensed Matter
Indentation Fatigue
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation Fatigue
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Microstructural Characterization Of Y-Psz (4 Mol%) Polycrystals By Means Of X-Ray Diffraction Experiments
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Indentation‐induced Cracks And The Toughness Anisotropy Of 9.4‐mol%‐yttria‐stabilized Cubic Zirconia Single Crystals
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
Técnica De Topografía De Rayos X Berg-Barrett. Características Y Aplicaciones
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Estimación De La Tenacidad En Zirconia Estabilizada Con Ytria Mediante Ensayos Vickers Y Knoop
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
High-Temperature Plastic Deformation Of Y2o3-Stabilized Zro2 Single Crystals. I. The Origin Of The Yield Drop And Associated Glide Polygonization
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
Diffusion And Deformation Maps In Co O
Plastic Deformation Of Coo Single Crystals By Compression Along 〈111〉
Diffusion And Deformation Maps In Co O
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Diffusion And Deformation Maps In Co O
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
Microhardness And Fracture Toughness Anisotropy In Cubic Zirconium Oxide Single Crystals
Analysis Of The Local Excess Density Of Dislocations In Y2o3-Stabilized Zro2 By Means Of X-Ray Berg-Barrett Topography
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
WEB ACCESIBLE