PUBLICACIÓN

Charcoal obtained from cherry stones in different carbonization atmospheres

ACCEDER A LA PUBLICACIÓN: Scopus Orcid

Venegas-Gomez A.; Gomez-Corzo M.; MacIas-Garcia A.; Carrasco-Amador J.P.

2020 Journal of Environmental Chemical Engineering

Chemical Engineering (miscellaneous) (Q1), Pollution (Q1), Process Chemistry and Technology (Q1), Waste Management and Disposal (Q1)

JCR: 5.909

SJR: 0.965

CITAS

17

DOI

10.1016/j.jece.2019.103561

EID

2-s2.0-85076577097

EISSN

2213-3437

AUTORES DE LA UEX

Juan Pablo Carrasco Amador

OTRAS PUBLICACIONES DE INTERÉS

Reacciones Químicas: Aspectos A Considerar
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Analysis Of Attention Deficit In Adhd In The School Population
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Test Device For The Optimisation Of 3d Bioprinting
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Methodology For Characterizing The Printability Of Hydrogels
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Methodology For Characterizing The Printability Of Hydrogels
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Methodology For Characterizing The Printability Of Hydrogels
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Herramientas Y Técnicas Para La Gestión De Los Riesgos En Proyectos: Casos Y Ejemplos
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Herramientas Y Técnicas Para La Gestión De Los Riesgos En Proyectos: Casos Y Ejemplos
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Herramientas Y Técnicas Para La Gestión De Los Riesgos En Proyectos: Casos Y Ejemplos
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Design Of An Action Protocol For Bioconstruction
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Aprovechamiento Del Corcho Residual Para La Construcción De Resinas Cambiadoras De Iones
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Aprovechamiento Del Corcho Residual Para La Construcción De Resinas Cambiadoras De Iones
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
Aprovechamiento Del Corcho Residual Para La Construcción De Resinas Cambiadoras De Iones
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Carbonizados Obtenidos A Partir De Huesos De Cerezas En Atmósfera De Carbonización Y De Nitrógeno A Distintas Temperaturas
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Carbonizados Obtenidos A Partir De Huesos De Cerezas En Atmósfera De Carbonización Y De Nitrógeno A Distintas Temperaturas
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Carbonizados Obtenidos A Partir De Huesos De Cerezas En Atmósfera De Carbonización Y De Nitrógeno A Distintas Temperaturas
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Lluvia De Propuestas Para Rebajar El Consumo Energético
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Lluvia De Propuestas Para Rebajar El Consumo Energético
Carbonizados Obtenidos A Partir De Huesos De Cereza En Atmósfera De Nitrógeno A Distintos Tiempos Isotérmicos
Lluvia De Propuestas Para Rebajar El Consumo Energético
Carbonizados Obtenidos A Partir De Huesos De Cereza En Atmósfera De Nitrógeno A Distintos Tiempos Isotérmicos
Use Of Cork Agglomerates As Acoustic Absorbents
Carbonizados Obtenidos A Partir De Huesos De Cereza En Atmósfera De Nitrógeno A Distintos Tiempos Isotérmicos
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Carbonizados Obtenidos A Partir De Huesos De Cereza
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Carbonizados Obtenidos A Partir De Huesos De Cereza
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Carbonizados Obtenidos A Partir De Huesos De Cereza
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation Of Charcoal From Cherry Stones
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation Of Charcoal From Cherry Stones
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Preparation Of Charcoal From Cherry Stones
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Study Of Cherry Stones As Raw Material In Preparation Of Carbonaceous Adsorbents
Preparation And Characterization Activated Carbon Obtained From Black Broom
Study Of Cherry Stones As Raw Material In Preparation Of Carbonaceous Adsorbents
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Study Of Cherry Stones As Raw Material In Preparation Of Carbonaceous Adsorbents
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
El Hueso De Cereza, Un Residuo Agroindustrial Objeto De Estudio Para El Aprovechamiento En La Obtención De Carbonizados Y Carbones Activados
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
El Hueso De Cereza, Un Residuo Agroindustrial Objeto De Estudio Para El Aprovechamiento En La Obtención De Carbonizados Y Carbones Activados
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
El Hueso De Cereza, Un Residuo Agroindustrial Objeto De Estudio Para El Aprovechamiento En La Obtención De Carbonizados Y Carbones Activados
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Estudio De La Microporosidad Estrecha De Carbones Activados Preparados Mediante Activación Con Aire A Partir De Huesos De Cereza
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Estudio De La Microporosidad Estrecha De Carbones Activados Preparados Mediante Activación Con Aire A Partir De Huesos De Cereza
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Estudio De La Microporosidad Estrecha De Carbones Activados Preparados Mediante Activación Con Aire A Partir De Huesos De Cereza
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Reclado De Materiales
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
WEB ACCESIBLE