PUBLICACIÓN

Study of Additives Designed in 3D to Lighten Synthetic Marbles

ACCEDER A LA PUBLICACIÓN: Scopus

2024 Lecture Notes in Mechanical Engineering

Aerospace Engineering (Q4), Automotive Engineering (Q4), Fluid Flow and Transfer Processes (Q4), Mechanical Engineering (Q4)

SJR: 0.168

CITAS

0

DOI

10.1007/978-3-031-51623-8_76

EID

2-s2.0-85192197734

ISSN

2195-4356

EISSN

2195-4364

ISBN

9783031516221

AUTORES DE LA UEX

Juan Pablo Carrasco Amador
Manuel Alfaro Domínguez
Jesús Manuel Rodríguez Rego
Alfonso Carlos Marcos Romero

OTRAS PUBLICACIONES DE INTERÉS

Reacciones Químicas: Aspectos A Considerar
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Software-Based Fluid Dynamic Simulation Of A Combustion Chamber
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Software-Based Fluid Dynamic Simulation Of A Combustion Chamber
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
Software-Based Fluid Dynamic Simulation Of A Combustion Chamber
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Analysis Of Attention Deficit In Adhd In The School Population
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Formando A Los Futuros Gestores Energéticos
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Formando A Los Futuros Gestores Energéticos
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Formando A Los Futuros Gestores Energéticos
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Computational Simulation-Based Comparative Analysis Of Standard 3d Printing And Conical Nozzles For Pneumatic And Piston-Driven Bioprinting
Evolution Of Bioprinting And Current Applications
Computational Simulation-Based Comparative Analysis Of Standard 3d Printing And Conical Nozzles For Pneumatic And Piston-Driven Bioprinting
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Computational Simulation-Based Comparative Analysis Of Standard 3d Printing And Conical Nozzles For Pneumatic And Piston-Driven Bioprinting
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Analysis Of The Use Of Hydrogels In Bioprinting
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Analysis Of The Use Of Hydrogels In Bioprinting
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Analysis Of The Use Of Hydrogels In Bioprinting
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Test Device For The Optimisation Of 3d Bioprinting
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Methodology For Characterizing The Printability Of Hydrogels
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Methodology For Characterizing The Printability Of Hydrogels
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Methodology For Characterizing The Printability Of Hydrogels
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Carbonaceous Adsorbents From Polymers-Rubber And Plastic Wastes For Adsorption Of Methylene Blue
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Carbonaceous Adsorbents From Polymers-Rubber And Plastic Wastes For Adsorption Of Methylene Blue
Improving Cell Viability And Velocity In Μ-Extrusion Bioprinting With A Novel Pre-Incubator Bioprinter And A Standard Fdm 3d Printing Nozzle
Carbonaceous Adsorbents From Polymers-Rubber And Plastic Wastes For Adsorption Of Methylene Blue
Improving Cell Viability And Velocity In Μ-Extrusion Bioprinting With A Novel Pre-Incubator Bioprinter And A Standard Fdm 3d Printing Nozzle
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Improving Cell Viability And Velocity In Μ-Extrusion Bioprinting With A Novel Pre-Incubator Bioprinter And A Standard Fdm 3d Printing Nozzle
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Modelo Nps Basado En El Aprendizaje Por Retos (Abr) Para La Educación Superior
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Modelo Nps Basado En El Aprendizaje Por Retos (Abr) Para La Educación Superior
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Modelo Nps Basado En El Aprendizaje Por Retos (Abr) Para La Educación Superior
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
Design Of An Action Protocol For Bioconstruction
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of An Iris-Fixed Phakic Intraocular Lens On The Transport Of Nutrients By The Aqueous Humor
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of An Iris-Fixed Phakic Intraocular Lens On The Transport Of Nutrients By The Aqueous Humor
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Influence Of An Iris-Fixed Phakic Intraocular Lens On The Transport Of Nutrients By The Aqueous Humor
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Influence Of Air Velocity On Indoor Environment Quality In Unidirectional Flow Operating Theatres: A Study Based On Computational Fluid Dynamics
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Influence Of Air Velocity On Indoor Environment Quality In Unidirectional Flow Operating Theatres: A Study Based On Computational Fluid Dynamics
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Influence Of Air Velocity On Indoor Environment Quality In Unidirectional Flow Operating Theatres: A Study Based On Computational Fluid Dynamics
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Nps... No Problems, Solutions: Una Metodología Para Llevar La Revolución De Las Competencias Al Aula
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Nps... No Problems, Solutions: Una Metodología Para Llevar La Revolución De Las Competencias Al Aula
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Nps... No Problems, Solutions: Una Metodología Para Llevar La Revolución De Las Competencias Al Aula
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Computational Simulation Of Aqueous Humour Dynamics In The Presence Of A Posterior-Chamber Versus Iris-Fixed Phakic Intraocular Lens
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Computational Simulation Of Aqueous Humour Dynamics In The Presence Of A Posterior-Chamber Versus Iris-Fixed Phakic Intraocular Lens
Simulation Of The Human Airways Using Virtual Topology Tools And Meshing Optimization
Computational Simulation Of Aqueous Humour Dynamics In The Presence Of A Posterior-Chamber Versus Iris-Fixed Phakic Intraocular Lens
Simulation Of The Human Airways Using Virtual Topology Tools And Meshing Optimization
Análisis Sobre La Visibilidad De Fachadas Mediante Simulación Gráfica En Proyectos De Construcción Rural
Simulation Of The Human Airways Using Virtual Topology Tools And Meshing Optimization
Análisis Sobre La Visibilidad De Fachadas Mediante Simulación Gráfica En Proyectos De Construcción Rural
Treatment Of Slaughterhouse Waste Water Mixed With Serum From Lacteal Industry Of Extremadura In Spain To Produce Clean Energy
Análisis Sobre La Visibilidad De Fachadas Mediante Simulación Gráfica En Proyectos De Construcción Rural
Treatment Of Slaughterhouse Waste Water Mixed With Serum From Lacteal Industry Of Extremadura In Spain To Produce Clean Energy
Topologías Virtuales En Estudios De Dinámica De Fluidos Computacional Sobre Modelos Del Árbol Bronquial Obtenidos De Imágenes Médicas
Treatment Of Slaughterhouse Waste Water Mixed With Serum From Lacteal Industry Of Extremadura In Spain To Produce Clean Energy
Topologías Virtuales En Estudios De Dinámica De Fluidos Computacional Sobre Modelos Del Árbol Bronquial Obtenidos De Imágenes Médicas
Educación Aumentada En El Área De Expresión Gráfica
Topologías Virtuales En Estudios De Dinámica De Fluidos Computacional Sobre Modelos Del Árbol Bronquial Obtenidos De Imágenes Médicas
Educación Aumentada En El Área De Expresión Gráfica
Técnicas De Procesamiento De Imágenes Aéreas Con Drones Para El Seguimiento De Puestas Del Aguilucho Cenizo En Campos De Cereal
Educación Aumentada En El Área De Expresión Gráfica
Técnicas De Procesamiento De Imágenes Aéreas Con Drones Para El Seguimiento De Puestas Del Aguilucho Cenizo En Campos De Cereal
A New Adaptive Time Step Method For Unsteady Flow Simulations In A Human Lung
Técnicas De Procesamiento De Imágenes Aéreas Con Drones Para El Seguimiento De Puestas Del Aguilucho Cenizo En Campos De Cereal
A New Adaptive Time Step Method For Unsteady Flow Simulations In A Human Lung
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
A New Adaptive Time Step Method For Unsteady Flow Simulations In A Human Lung
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Numerical And Experimental Analysis Of The Transitional Flow Across A Real Stenosis
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Numerical And Experimental Analysis Of The Transitional Flow Across A Real Stenosis
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Numerical And Experimental Analysis Of The Transitional Flow Across A Real Stenosis
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Inventor 2017: [ Autodesk ]
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Inventor 2017: [ Autodesk ]
Preparation, Characterization And Study Of Morphology Of Activated Carbon Fibers
Inventor 2017: [ Autodesk ]
Preparation, Characterization And Study Of Morphology Of Activated Carbon Fibers
Caracterización De La Corrosión Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos) Por Las Técnicas Sem-Edx Y Xrd
Preparation, Characterization And Study Of Morphology Of Activated Carbon Fibers
Caracterización De La Corrosión Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos) Por Las Técnicas Sem-Edx Y Xrd
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Caracterización De La Corrosión Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos) Por Las Técnicas Sem-Edx Y Xrd
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Experimental Study Of Drying Of Agricultural Solid Biomass Residues Using Hot Combustion Gases Of A Pellet Stove
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Experimental Study Of Drying Of Agricultural Solid Biomass Residues Using Hot Combustion Gases Of A Pellet Stove
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Experimental Study Of Drying Of Agricultural Solid Biomass Residues Using Hot Combustion Gases Of A Pellet Stove
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Arquitectura De Control Electrónico En Cuadros De Maniobra De Máquinas De Control Numérico Para Corte Por Plasma Y Oxigás
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Arquitectura De Control Electrónico En Cuadros De Maniobra De Máquinas De Control Numérico Para Corte Por Plasma Y Oxigás
The Cooperative Learning: Understanding And Increasing The Knowledge Of The Facilities Design Without A Professor Extra Effort
Arquitectura De Control Electrónico En Cuadros De Maniobra De Máquinas De Control Numérico Para Corte Por Plasma Y Oxigás
The Cooperative Learning: Understanding And Increasing The Knowledge Of The Facilities Design Without A Professor Extra Effort
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
The Cooperative Learning: Understanding And Increasing The Knowledge Of The Facilities Design Without A Professor Extra Effort
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Electronic Control Architecture In Cabinets For Plasma And Oxifuel Cnc Cutting Machines
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Electronic Control Architecture In Cabinets For Plasma And Oxifuel Cnc Cutting Machines
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electronic Control Architecture In Cabinets For Plasma And Oxifuel Cnc Cutting Machines
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Diagnóstico De La Conservación Y Restauración Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos)
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Diagnóstico De La Conservación Y Restauración Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos)
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Diagnóstico De La Conservación Y Restauración Del Edificio Metálico De Badajoz (Antiguo Mercado De Abastos)
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Characterization Of Particle Deposition In A Lung Model Using An Individual Path
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Characterization Of Particle Deposition In A Lung Model Using An Individual Path
Environmental Treatment Of Slaughterhouse Wastes In A Continuously Stirred Anaerobic Reactor: Effect Of Flow Rate Variation On Biogas Production
Characterization Of Particle Deposition In A Lung Model Using An Individual Path
Environmental Treatment Of Slaughterhouse Wastes In A Continuously Stirred Anaerobic Reactor: Effect Of Flow Rate Variation On Biogas Production
Experimental Study Of Gasification Of Biomass Residues For Electrical Energy Generation
Environmental Treatment Of Slaughterhouse Wastes In A Continuously Stirred Anaerobic Reactor: Effect Of Flow Rate Variation On Biogas Production
Experimental Study Of Gasification Of Biomass Residues For Electrical Energy Generation
Mathematical Model Of A Laboratory-Scale Plant For Slaughterhouse Effluents Biodigestion For Biogas Production
Experimental Study Of Gasification Of Biomass Residues For Electrical Energy Generation
Mathematical Model Of A Laboratory-Scale Plant For Slaughterhouse Effluents Biodigestion For Biogas Production
Performance Characteristics And Internal Flow Patterns In A Reverse-Running Pump-Turbine
Mathematical Model Of A Laboratory-Scale Plant For Slaughterhouse Effluents Biodigestion For Biogas Production
Performance Characteristics And Internal Flow Patterns In A Reverse-Running Pump-Turbine
A Methodology For Geometry Generation Of The Lower Conductive Zone Of The Lung Airways And Simulation By Intermediate Boundary Conditions
Performance Characteristics And Internal Flow Patterns In A Reverse-Running Pump-Turbine
A Methodology For Geometry Generation Of The Lower Conductive Zone Of The Lung Airways And Simulation By Intermediate Boundary Conditions
Temperature Effect On Performance Of A Laboratory Scale Plant For Anaerobic Digestion Of Meat Industry Wastes To Produce Methane
A Methodology For Geometry Generation Of The Lower Conductive Zone Of The Lung Airways And Simulation By Intermediate Boundary Conditions
Temperature Effect On Performance Of A Laboratory Scale Plant For Anaerobic Digestion Of Meat Industry Wastes To Produce Methane
An Experimental Setup For The Study Of The Steady Air Flow In A Diesel Engine Chamber
Temperature Effect On Performance Of A Laboratory Scale Plant For Anaerobic Digestion Of Meat Industry Wastes To Produce Methane
An Experimental Setup For The Study Of The Steady Air Flow In A Diesel Engine Chamber
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
An Experimental Setup For The Study Of The Steady Air Flow In A Diesel Engine Chamber
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Experimental And Numerical Investigation Of The Flow In A Micropump Model
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Experimental And Numerical Investigation Of The Flow In A Micropump Model
Preparación De Adsorbentes Carbonosos A Partir De Goma De Neumáticos
Experimental And Numerical Investigation Of The Flow In A Micropump Model
Preparación De Adsorbentes Carbonosos A Partir De Goma De Neumáticos
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparación De Adsorbentes Carbonosos A Partir De Goma De Neumáticos
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Numerical Flow Simulation In A Reciprocating Valveless Micropump With Parallel Geometry Nozzle-Diffuser
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Numerical Flow Simulation In A Reciprocating Valveless Micropump With Parallel Geometry Nozzle-Diffuser
Studies Of The Flow Of Air In A Mixed-Flow Pump Using Numerical Simulations
Numerical Flow Simulation In A Reciprocating Valveless Micropump With Parallel Geometry Nozzle-Diffuser
Studies Of The Flow Of Air In A Mixed-Flow Pump Using Numerical Simulations
Numerical Simulation Of The Generation Of Fluid-Dynamic Perturbations In A Centrifugal Pump Due To Rotor-Volute-Circuit Interaction
Studies Of The Flow Of Air In A Mixed-Flow Pump Using Numerical Simulations
Numerical Simulation Of The Generation Of Fluid-Dynamic Perturbations In A Centrifugal Pump Due To Rotor-Volute-Circuit Interaction
Aplicación De La Semejanza En Mecánica De Fluidos: Concurso De Diseño Y Lanzamiento De Paracaídas
Numerical Simulation Of The Generation Of Fluid-Dynamic Perturbations In A Centrifugal Pump Due To Rotor-Volute-Circuit Interaction
Aplicación De La Semejanza En Mecánica De Fluidos: Concurso De Diseño Y Lanzamiento De Paracaídas
Adsorption Of Cadmium On Carbonaceous Adsorbents Developed From Used Tire Rubber
Aplicación De La Semejanza En Mecánica De Fluidos: Concurso De Diseño Y Lanzamiento De Paracaídas
Adsorption Of Cadmium On Carbonaceous Adsorbents Developed From Used Tire Rubber
Development Of Adsorbents From Used Tire Rubber: Their Use In The Adsorption Of Organic And Inorganic Solutes In Aqueous Solution
Adsorption Of Cadmium On Carbonaceous Adsorbents Developed From Used Tire Rubber
Development Of Adsorbents From Used Tire Rubber: Their Use In The Adsorption Of Organic And Inorganic Solutes In Aqueous Solution
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Development Of Adsorbents From Used Tire Rubber: Their Use In The Adsorption Of Organic And Inorganic Solutes In Aqueous Solution
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Combustible Gas Production (Methane) And Biodegradation Of Solid And Liquid Mixtures Of Meat Industry Wastes
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Combustible Gas Production (Methane) And Biodegradation Of Solid And Liquid Mixtures Of Meat Industry Wastes
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Combustible Gas Production (Methane) And Biodegradation Of Solid And Liquid Mixtures Of Meat Industry Wastes
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Air Flow Simulation In A Diesel Engine
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Air Flow Simulation In A Diesel Engine
Numerical Investigation Of A Centrifugal Pump Running In Reverse Mode
Air Flow Simulation In A Diesel Engine
Numerical Investigation Of A Centrifugal Pump Running In Reverse Mode
Devulcanization And Demineralization Of Used Tire Rubber By Thermal Chemical Methods: A Study By X-Ray Diffraction
Numerical Investigation Of A Centrifugal Pump Running In Reverse Mode
Devulcanization And Demineralization Of Used Tire Rubber By Thermal Chemical Methods: A Study By X-Ray Diffraction
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Devulcanization And Demineralization Of Used Tire Rubber By Thermal Chemical Methods: A Study By X-Ray Diffraction
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Use Of Cork Agglomerates As Acoustic Absorbents
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Textural Properties And The Gasification In Air
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Textural Properties And The Gasification In Air
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Chemical Composition
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Textural Properties And The Gasification In Air
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Chemical Composition
Experimental And Numerical Investigation Of A Centrifugal Pump Working As A Turbine
Effect Of The Chemical Heat Treatment In A Semianthracite Char On The Chemical Composition
Experimental And Numerical Investigation Of A Centrifugal Pump Working As A Turbine
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Experimental And Numerical Investigation Of A Centrifugal Pump Working As A Turbine
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Captadores Solares Térmicos: Cálculo Y Comparación De Rendimientos Para Distintas Aplicaciones
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Captadores Solares Térmicos: Cálculo Y Comparación De Rendimientos Para Distintas Aplicaciones
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Captadores Solares Térmicos: Cálculo Y Comparación De Rendimientos Para Distintas Aplicaciones
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Demineralisation Of Semi-Anthracite Char With Molten Salts/hcl. Effects On The Porous Texture And Reactivity In Air
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Demineralisation Of Semi-Anthracite Char With Molten Salts/hcl. Effects On The Porous Texture And Reactivity In Air
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Demineralisation Of Semi-Anthracite Char With Molten Salts/hcl. Effects On The Porous Texture And Reactivity In Air
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Demineralisation Of A Semianthracite Char With Molten Salts/hcl. A Study By X-Ray Diffraction
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Uso De Un Infiltrómetro De Succión Para La Determinación De La Conductividad Hidráulica Del Suelo
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Uso De Un Infiltrómetro De Succión Para La Determinación De La Conductividad Hidráulica Del Suelo
Procedimiento Para Comparación De Captadores Solares Térmicos Y Obtención De Las Máximas Prestaciones Térmicas
Uso De Un Infiltrómetro De Succión Para La Determinación De La Conductividad Hidráulica Del Suelo
Procedimiento Para Comparación De Captadores Solares Térmicos Y Obtención De Las Máximas Prestaciones Térmicas
Consideraciones Al Proyecto De Energía Eólica: Parámetros Que Influyen En Su Rentabilidad.
Procedimiento Para Comparación De Captadores Solares Térmicos Y Obtención De Las Máximas Prestaciones Térmicas
Consideraciones Al Proyecto De Energía Eólica: Parámetros Que Influyen En Su Rentabilidad.
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Consideraciones Al Proyecto De Energía Eólica: Parámetros Que Influyen En Su Rentabilidad.
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Máxima Eficiencia De Un Equipo De Bombeo Fotovoltaico Utilizado Para Riego, En Función De Las Curvas Caudal-Altura Y Frecuencia.
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Máxima Eficiencia De Un Equipo De Bombeo Fotovoltaico Utilizado Para Riego, En Función De Las Curvas Caudal-Altura Y Frecuencia.
Aprovechamiento Energético Mediante Procesos De Gasificación Con Aire De Residuos Biomásicos
Máxima Eficiencia De Un Equipo De Bombeo Fotovoltaico Utilizado Para Riego, En Función De Las Curvas Caudal-Altura Y Frecuencia.
Aprovechamiento Energético Mediante Procesos De Gasificación Con Aire De Residuos Biomásicos
Optimización Del Proceso De Combustión En Una Caldera De Calefacción De 465 Kw, Modelo Cpa De Roca.
Aprovechamiento Energético Mediante Procesos De Gasificación Con Aire De Residuos Biomásicos
Optimización Del Proceso De Combustión En Una Caldera De Calefacción De 465 Kw, Modelo Cpa De Roca.
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Optimización Del Proceso De Combustión En Una Caldera De Calefacción De 465 Kw, Modelo Cpa De Roca.
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Interaction Of Molten Salts With A Semianthracite Char At 743-1173 K. Effects On Chemical Composition, Textural Properties, And Reactivity In Air
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Interaction Of Molten Salts With A Semianthracite Char At 743-1173 K. Effects On Chemical Composition, Textural Properties, And Reactivity In Air
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Interaction Of Molten Salts With A Semianthracite Char At 743-1173 K. Effects On Chemical Composition, Textural Properties, And Reactivity In Air
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Una Alternativa Energética A La Contaminación Generada Por La Industria Agroalimentaria En Extremadura
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Una Alternativa Energética A La Contaminación Generada Por La Industria Agroalimentaria En Extremadura
Características De Las Curvas Caudal Altura Y Frecuencia De Las Instalaciones De Bombeo Fotovoltaico
Una Alternativa Energética A La Contaminación Generada Por La Industria Agroalimentaria En Extremadura
Características De Las Curvas Caudal Altura Y Frecuencia De Las Instalaciones De Bombeo Fotovoltaico
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Características De Las Curvas Caudal Altura Y Frecuencia De Las Instalaciones De Bombeo Fotovoltaico
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Las Agencias Locales Y Regionales De La Energía: Necesidad De Una Legislación Para La Gestión Local De La Energía
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Las Agencias Locales Y Regionales De La Energía: Necesidad De Una Legislación Para La Gestión Local De La Energía
Determinación Y Comparación De Los Rendimientos De Captadores Solares Térmicos: Aplicación A La Calefacción De Edificios
Las Agencias Locales Y Regionales De La Energía: Necesidad De Una Legislación Para La Gestión Local De La Energía
Determinación Y Comparación De Los Rendimientos De Captadores Solares Térmicos: Aplicación A La Calefacción De Edificios
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Determinación Y Comparación De Los Rendimientos De Captadores Solares Térmicos: Aplicación A La Calefacción De Edificios
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
La Contribución De Los Ayuntamientos Hacia La Sostenibilidad Del Sistema Energético
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
La Contribución De Los Ayuntamientos Hacia La Sostenibilidad Del Sistema Energético
Reconocimiento De Materiales Plásticos A Través De Técnicas De Visión Artificial En Color Al Objeto De Su Implementación En Una Línea De Triaje De Una E.r.s.u.
La Contribución De Los Ayuntamientos Hacia La Sostenibilidad Del Sistema Energético
Reconocimiento De Materiales Plásticos A Través De Técnicas De Visión Artificial En Color Al Objeto De Su Implementación En Una Línea De Triaje De Una E.r.s.u.
Caracterización Y Depuración Biológica Anaerobia De Efluentes De Aguas Residuales De Matadero
Reconocimiento De Materiales Plásticos A Través De Técnicas De Visión Artificial En Color Al Objeto De Su Implementación En Una Línea De Triaje De Una E.r.s.u.
Caracterización Y Depuración Biológica Anaerobia De Efluentes De Aguas Residuales De Matadero
Determinación Óptima De Las Funciones Hidráulicas De Un Suelo Arenoso: I. Curva De Retención Del Agua
Caracterización Y Depuración Biológica Anaerobia De Efluentes De Aguas Residuales De Matadero
Determinación Óptima De Las Funciones Hidráulicas De Un Suelo Arenoso: I. Curva De Retención Del Agua
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Determinación Óptima De Las Funciones Hidráulicas De Un Suelo Arenoso: I. Curva De Retención Del Agua
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Interaction Of Molten Salts With A Semianthracite Char At 873 K. A Study By X-Ray Diffraction
Reclado De Materiales
Interaction Of Molten Salts With A Semianthracite Char At 873 K. A Study By X-Ray Diffraction
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Interaction Of Molten Salts With A Semianthracite Char At 873 K. A Study By X-Ray Diffraction
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Demineralization Of Anthracite Char By Molten Salts
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Demineralization Of Anthracite Char By Molten Salts
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Demineralization Of Anthracite Char By Molten Salts
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
WEB ACCESIBLE