PUBLICACIÓN

Preparation and characterization of ZrO2/Y2O3/Al2O3-based microstructured multilayer sol–gel coatings

ACCEDER A LA PUBLICACIÓN: Scopus Orcid

Carrasco-Amador J.P., Diaz-Parralejo A., Macias-Garcia A., Diaz-Diez M.A., Olivares-Marin M.

2017 CERAMICS INTERNATIONAL

Ceramics and Composites (Q1), Electronic, Optical and Magnetic Materials (Q1), Materials Chemistry (Q1), Process Chemistry and Technology (Q1), Surfaces, Coatings and Films (Q1)

JCR: 3.057

SJR: 0.784

CITAS

7

DOI

10.1016/j.ceramint.2017.07.166

EID

2-s2.0-85026328950

ISSN

0272-8842

BIBTEX

@ARTICLE{Carrasco-Amador201714210, author= {Carrasco-Amador, J.P. and Diaz-Parralejo, A. and Macías-García, A. and Díaz-Díez, M.Á. and Olivares-Marín, M.}, title= {Preparation and characterization of ZrO<inf>2</inf>/Y<inf>2</inf>O<inf>3</inf>/Al<inf>2</inf>O<inf>3</inf>-based microstructured multilayer sol–gel coatings}, journal= {Ceramics International}, year= {2017}, volume= {43}, number= {16}, pages= {14210-14217}, doi= {10.1016/j.ceramint.2017.07.166}, note= {cited By 0}, url= {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85026328950&doi=10.1016%2fj.ceramint.2017.07.166&partnerID=40&md5=d84ff7e648265867c14b4dd9fe664410}, document_type= {Article}, source= {Scopus}}

AUTORES DE LA UEX

Juan Pablo Carrasco Amador
Mara Olivares Marín
Antonio Díaz Parralejo
María Ángeles Díaz Díez

OTRAS PUBLICACIONES DE INTERÉS

Reacciones Químicas: Aspectos A Considerar
Manufacture And Characterization Of Polymer Concrete Combining Inorganic And Organic Fillers
Selection Of Sol-Gel Coatings By The Analytic Hierarchy Process And Life Cycle Assessment For Concentrated Solar Power Plants
Manufacture And Characterization Of Polymer Concrete Combining Inorganic And Organic Fillers
Selection Of Sol-Gel Coatings By The Analytic Hierarchy Process And Life Cycle Assessment For Concentrated Solar Power Plants
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
Selection Of Sol-Gel Coatings By The Analytic Hierarchy Process And Life Cycle Assessment For Concentrated Solar Power Plants
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Preparation And Characterization Of Polymer Concrete From Slate, Granite And Kaolin Wastes Minerals
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Preparation And Characterization Of Polymer Concrete From Slate, Granite And Kaolin Wastes Minerals
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Preparation And Characterization Of Polymer Concrete From Slate, Granite And Kaolin Wastes Minerals
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Insights About The Formation Of Secondary Char During Htc Processes
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Insights About The Formation Of Secondary Char During Htc Processes
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Insights About The Formation Of Secondary Char During Htc Processes
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Guía Para El Desarrollo De Instalaciones Fotovoltaicas Mediante El Uso De Software Especializado
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Tipos De Energía Solar Y Perspectivas De Los Sistemas Fotovoltaicos
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Study Of The Heat Exchange And Relaxation Conditions Of Residual Stresses Due To Welding Of Austenitic Stainless Steel
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Thermal Performance And Sound Absorption Capability Of Water Hyacinth Stems-Based Materials
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Thermal Performance And Sound Absorption Capability Of Water Hyacinth Stems-Based Materials
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Thermal Performance And Sound Absorption Capability Of Water Hyacinth Stems-Based Materials
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Method To Measure Electrical Conductivity In Carbonaceous Materials By Means Of A 3d-Designed System
Test Device For The Optimisation Of 3d Bioprinting
Method To Measure Electrical Conductivity In Carbonaceous Materials By Means Of A 3d-Designed System
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Method To Measure Electrical Conductivity In Carbonaceous Materials By Means Of A 3d-Designed System
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Optimizing Al And Fe Load During Htc Of Water Hyacinth: Improvement Of Induced Hc Physicochemical Properties
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Optimizing Al And Fe Load During Htc Of Water Hyacinth: Improvement Of Induced Hc Physicochemical Properties
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Optimizing Al And Fe Load During Htc Of Water Hyacinth: Improvement Of Induced Hc Physicochemical Properties
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Methodology For Characterizing The Printability Of Hydrogels
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Methodology For Characterizing The Printability Of Hydrogels
Facile Preparation Of Glycine-Based Mesoporous Graphitic Carbons With Embedded Cobalt Nanoparticles
Methodology For Characterizing The Printability Of Hydrogels
Facile Preparation Of Glycine-Based Mesoporous Graphitic Carbons With Embedded Cobalt Nanoparticles
Collaborative Online International Learning: A Way To Develop Students’ Engineering Capabilities And Awareness To Become Global Citizens
Facile Preparation Of Glycine-Based Mesoporous Graphitic Carbons With Embedded Cobalt Nanoparticles
Collaborative Online International Learning: A Way To Develop Students’ Engineering Capabilities And Awareness To Become Global Citizens
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Collaborative Online International Learning: A Way To Develop Students’ Engineering Capabilities And Awareness To Become Global Citizens
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Numerical Simulation Of The Cleaning Performance Of A Venturi Scrubber
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Review Of Medium Temperature Solar Concentration Technology For Industrial Applications
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Study Of Heat Distribution In The Volume Of A Climatic Chamber For Application In Bioprinting Techniques
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Revisión De La Tecnología De Concentración Solar De Media Temperatura Para Aplicaciones Industriales
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Estudio De La Distribución De Calor En El Volumen De Una Cámara Climática Para Aplicación De Técnicas De Bioimpresión
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Aplicación Práctica De Ilustraciones Técnicas Como Herramienta De Desarrollo Competencial En Alumnos De Ingeniería
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Virtualización Integral De Asignaturas De Expresión Gráfica En Los Grados De Ingeniería
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
A Stable High-Capacity Lithium-Ion Battery Using A Biomass-Derived Sulfur-Carbon Cathode And Lithiated Silicon Anode
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
A Stable High-Capacity Lithium-Ion Battery Using A Biomass-Derived Sulfur-Carbon Cathode And Lithiated Silicon Anode
Alternative Lithium-Ion Battery Using Biomass-Derived Carbons As Environmentally Sustainable Anode
A Stable High-Capacity Lithium-Ion Battery Using A Biomass-Derived Sulfur-Carbon Cathode And Lithiated Silicon Anode
Alternative Lithium-Ion Battery Using Biomass-Derived Carbons As Environmentally Sustainable Anode
Organic Polyradicals As Redox Mediators: Effect Of Intramolecular Radical Interactions On Their Efficiency
Alternative Lithium-Ion Battery Using Biomass-Derived Carbons As Environmentally Sustainable Anode
Organic Polyradicals As Redox Mediators: Effect Of Intramolecular Radical Interactions On Their Efficiency
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Organic Polyradicals As Redox Mediators: Effect Of Intramolecular Radical Interactions On Their Efficiency
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Implementación Del Aprendizaje Basado En Proyectos A Través De La Tecnología Bim = Implementing Project-Based Learning Through Bim Technology
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Aplicación De La Metodología De Apendrizaje Inverso Como Herramienta De Innovación Educativa En Ingeniería De Proyectos
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Control Pid De Temperatura-Humedad-Co2 En Una Cámara Para Técnicas De Bioimpresión
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Temperature-Humidity-Co2 Pid Controller In A Camera For Bioprinting Techniques
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
Application Of The Flipped Learning Methodology As A Tool For Educational Innovation In Project Engineering
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Kinetic Study Of Copper Retention By Kaolin Using A System Of Supports Designed In 3d
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
La Impresión 3d Como Pilar Tecnológico De La Industria 4.0
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
Design Of An Action Protocol For Bioconstruction
Bioink Temperature Influence On Shear Stress, Pressure And Velocity Using Computational Simulation
Design Of An Action Protocol For Bioconstruction
Computational Fluid Dynamics Study Of Inlet Velocity On Extrusion-Based Bioprinting
Design Of An Action Protocol For Bioconstruction
Computational Fluid Dynamics Study Of Inlet Velocity On Extrusion-Based Bioprinting
Design Of An Action Protocol For Bioconstruction
Computational Fluid Dynamics Study Of Inlet Velocity On Extrusion-Based Bioprinting
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Design Of An Action Protocol For Bioconstruction
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Temperature And Humidity Pid Controller For A Bioprinter Atmospheric Enclosure System
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Magnetic Behavior Of Carbon Materials Made From Biomass By Fe-Assisted Hydrothermal Carbonization
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Magnetic Behavior Of Carbon Materials Made From Biomass By Fe-Assisted Hydrothermal Carbonization
Combined Influence Of Meso- And Macroporosity Of Soft-Hard Templated Carbon Electrodes On The Performance Of Li-O2 Cells With Different Configurations
Magnetic Behavior Of Carbon Materials Made From Biomass By Fe-Assisted Hydrothermal Carbonization
Combined Influence Of Meso- And Macroporosity Of Soft-Hard Templated Carbon Electrodes On The Performance Of Li-O2 Cells With Different Configurations
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Combined Influence Of Meso- And Macroporosity Of Soft-Hard Templated Carbon Electrodes On The Performance Of Li-O2 Cells With Different Configurations
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Hydrocarbonization. Does It Worth To Be Called A Pretreatment?
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Hydrocarbonization. Does It Worth To Be Called A Pretreatment?
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Hydrocarbonization. Does It Worth To Be Called A Pretreatment?
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Aplicación Del Aprendizaje Inverso, Autoevaluación Y Coevaluación En Ingeniería Gráfica
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Extrusion Bioprinting Of A Commercial Bioink: A Computational Simulation Of The Temperature / Pressure Relation
Ágora Internacional Sobre Educación, Investigación Y Empleo: Hablando De Competencias
Extrusion Bioprinting Of A Commercial Bioink: A Computational Simulation Of The Temperature / Pressure Relation
Conical Tip Gauge Influence In Extrusion Bioprinting: Computational Simulation Study
Extrusion Bioprinting Of A Commercial Bioink: A Computational Simulation Of The Temperature / Pressure Relation
Conical Tip Gauge Influence In Extrusion Bioprinting: Computational Simulation Study
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Conical Tip Gauge Influence In Extrusion Bioprinting: Computational Simulation Study
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
3d Printing Experiences As A Teaching Innovation Tool In Project Engineering
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Nozzle Pressure Analysis Of Several Hydrogel On Extrusion-Based Bioprinting Using Computational Fluid Dynamics
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Máster De Gestión Integral De Proyectos Bajo Enfoque Competencial Y Metodología Nps®
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
Aplicación De La Ingeniería Inversa En La Industria De Turbo Propulsores Por Medio De Modelado Y Diseño Industrial En 3d
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Sello Rime De Calidad De La Función Orientadora: Poniendo En Valor La Acción Tutorial
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
¿calidad En La Mentoría? La Expresión Que Le Da Valor
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Model Of Evaluation Of Syndrome Of The Sick Building In Academic Blocks Of An Academic Institution Of Higher Education
Diseño E Implantación Sistemática De Evocaciones Y De Evaluación Por Rúbricas En Ingeniería Gráfica Por Medio De Herramientas Tic
Model Of Evaluation Of Syndrome Of The Sick Building In Academic Blocks Of An Academic Institution Of Higher Education
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Model Of Evaluation Of Syndrome Of The Sick Building In Academic Blocks Of An Academic Institution Of Higher Education
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Method For Promoting In-Situ Hydrochar Porosity In Hydrothermal Carbonization Of Almond Shells With Air Activation
Fabricación Y Evaluación De Una Cámara Climática Para El Desarrollo De Técnicas De Bioimpresión 3d
Method For Promoting In-Situ Hydrochar Porosity In Hydrothermal Carbonization Of Almond Shells With Air Activation
Tailoring Oxygen Redox Reactions In Ionic Liquid Based Li/o 2 Batteries By Means Of The Li + Dopant Concentration
Method For Promoting In-Situ Hydrochar Porosity In Hydrothermal Carbonization Of Almond Shells With Air Activation
Tailoring Oxygen Redox Reactions In Ionic Liquid Based Li/o 2 Batteries By Means Of The Li + Dopant Concentration
Low-Cost Disordered Carbons For Li/s Batteries: A High-Performance Carbon With Dual Porosity Derived From Cherry Pits
Tailoring Oxygen Redox Reactions In Ionic Liquid Based Li/o 2 Batteries By Means Of The Li + Dopant Concentration
Low-Cost Disordered Carbons For Li/s Batteries: A High-Performance Carbon With Dual Porosity Derived From Cherry Pits
Studies Of Lithium-Oxygen Battery Electrodes By Energy- Dependent Full-Field Transmission Soft X-Ray Microscopy
Low-Cost Disordered Carbons For Li/s Batteries: A High-Performance Carbon With Dual Porosity Derived From Cherry Pits
Studies Of Lithium-Oxygen Battery Electrodes By Energy- Dependent Full-Field Transmission Soft X-Ray Microscopy
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Studies Of Lithium-Oxygen Battery Electrodes By Energy- Dependent Full-Field Transmission Soft X-Ray Microscopy
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Potassium Salts As Electrolyte Additives In Lithium-Oxygen Batteries
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Potassium Salts As Electrolyte Additives In Lithium-Oxygen Batteries
Discharge Products Of Ionic Liquid-Based Li-O2 Batteries Observed By Energy Dependent Soft X-Ray Transmission Microscopy
Potassium Salts As Electrolyte Additives In Lithium-Oxygen Batteries
Discharge Products Of Ionic Liquid-Based Li-O2 Batteries Observed By Energy Dependent Soft X-Ray Transmission Microscopy
Influence Of Texture In Hybrid Carbon-Phosphomolybdic Acid Materials On Their Performance As Electrodes In Supercapacitors
Discharge Products Of Ionic Liquid-Based Li-O2 Batteries Observed By Energy Dependent Soft X-Ray Transmission Microscopy
Influence Of Texture In Hybrid Carbon-Phosphomolybdic Acid Materials On Their Performance As Electrodes In Supercapacitors
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Influence Of Texture In Hybrid Carbon-Phosphomolybdic Acid Materials On Their Performance As Electrodes In Supercapacitors
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Aspectos Ingenieriles Y Técnicos De La Construcción De La Línea Ferroviaria De Mercancías De Altas Prestaciones En Extremadura Y Su Efecto En La Competitividad Económica Extremeña
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Aspectos Ingenieriles Y Técnicos De La Construcción De La Línea Ferroviaria De Mercancías De Altas Prestaciones En Extremadura Y Su Efecto En La Competitividad Económica Extremeña
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Aspectos Ingenieriles Y Técnicos De La Construcción De La Línea Ferroviaria De Mercancías De Altas Prestaciones En Extremadura Y Su Efecto En La Competitividad Económica Extremeña
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Spatial Distributions Of Discharged Products Of Lithium-Oxygen Batteries Revealed By Synchrotron X-Ray Transmission Microscopy
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Spatial Distributions Of Discharged Products Of Lithium-Oxygen Batteries Revealed By Synchrotron X-Ray Transmission Microscopy
Organic Radicals For The Enhancement Of Oxygen Reduction Reaction In Li-O2 Batteries
Spatial Distributions Of Discharged Products Of Lithium-Oxygen Batteries Revealed By Synchrotron X-Ray Transmission Microscopy
Organic Radicals For The Enhancement Of Oxygen Reduction Reaction In Li-O2 Batteries
Mass-Transport Control On The Discharge Mechanism In Li-O2 Batteries Using Carbon Cathodes With Varied Porosity
Organic Radicals For The Enhancement Of Oxygen Reduction Reaction In Li-O2 Batteries
Mass-Transport Control On The Discharge Mechanism In Li-O2 Batteries Using Carbon Cathodes With Varied Porosity
Operando Uv-Visible Spectroscopy Evidence Of The Reactions Of Iodide As Redox Mediator In Li-O2 Batteries
Mass-Transport Control On The Discharge Mechanism In Li-O2 Batteries Using Carbon Cathodes With Varied Porosity
Operando Uv-Visible Spectroscopy Evidence Of The Reactions Of Iodide As Redox Mediator In Li-O2 Batteries
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Operando Uv-Visible Spectroscopy Evidence Of The Reactions Of Iodide As Redox Mediator In Li-O2 Batteries
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Simple Method To Relate Experimental Pore Size Distribution And Discharge Capacity In Cathodes For Li/o2 Batteries
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Simple Method To Relate Experimental Pore Size Distribution And Discharge Capacity In Cathodes For Li/o2 Batteries
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Simple Method To Relate Experimental Pore Size Distribution And Discharge Capacity In Cathodes For Li/o2 Batteries
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Effects Of Architecture On The Electrochemistry Of Binder-Free Inverse Opal Carbons As Li-Air Cathodes In An Ionic Liquid-Based Electrolyte
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Effects Of Architecture On The Electrochemistry Of Binder-Free Inverse Opal Carbons As Li-Air Cathodes In An Ionic Liquid-Based Electrolyte
Influence Of Morphology, Porosity And Crystal Structure Of Caco3 Precursors On The Co2 Capture Performance Of Cao-Derived Sorbents
Effects Of Architecture On The Electrochemistry Of Binder-Free Inverse Opal Carbons As Li-Air Cathodes In An Ionic Liquid-Based Electrolyte
Influence Of Morphology, Porosity And Crystal Structure Of Caco3 Precursors On The Co2 Capture Performance Of Cao-Derived Sorbents
Influence Of The Operation Conditions On Co2 Capture By Cao-Derived Sorbents Prepared From Synthetic Caco3
Influence Of Morphology, Porosity And Crystal Structure Of Caco3 Precursors On The Co2 Capture Performance Of Cao-Derived Sorbents
Influence Of The Operation Conditions On Co2 Capture By Cao-Derived Sorbents Prepared From Synthetic Caco3
Co2 Adsorption Performance Of Amino-Functionalized Sba-15 Under Post-Combustion Conditions
Influence Of The Operation Conditions On Co2 Capture By Cao-Derived Sorbents Prepared From Synthetic Caco3
Co2 Adsorption Performance Of Amino-Functionalized Sba-15 Under Post-Combustion Conditions
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Co2 Adsorption Performance Of Amino-Functionalized Sba-15 Under Post-Combustion Conditions
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Development Of Adsorbents For Co2 Capture From Waste Materials: A Review
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Development Of Adsorbents For Co2 Capture From Waste Materials: A Review
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development Of Adsorbents For Co2 Capture From Waste Materials: A Review
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Interdiffusion Phenomena Of Zirconia-Nitride Layers On Coated Aisi 310 Steel
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
The Influence Of The Precursor And Synthesis Method On The Co2 Capture Capacity Of Carpet Waste-Based Sorbents
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
The Influence Of The Precursor And Synthesis Method On The Co2 Capture Capacity Of Carpet Waste-Based Sorbents
Preparation Of A Highly Microporous Carbon From A Carpet Material And Its Application As Co2 Sorbent
The Influence Of The Precursor And Synthesis Method On The Co2 Capture Capacity Of Carpet Waste-Based Sorbents
Preparation Of A Highly Microporous Carbon From A Carpet Material And Its Application As Co2 Sorbent
Development Of Regenerable Sorbents From Abundant Wastes For Capture Of Co2
Preparation Of A Highly Microporous Carbon From A Carpet Material And Its Application As Co2 Sorbent
Development Of Regenerable Sorbents From Abundant Wastes For Capture Of Co2
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Development Of Regenerable Sorbents From Abundant Wastes For Capture Of Co2
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Improving The Performance Of Biomass-Derived Carbons In Li-Ion Batteries By Controlling The Lithium Insertion Process
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Improving The Performance Of Biomass-Derived Carbons In Li-Ion Batteries By Controlling The Lithium Insertion Process
Use Of Small-Amplitude Oscillatory Shear Rheometry To Study The Flow Properties Of Pure And Potassium-Doped Li2zro3 Sorbents During The Sorption Of Co2 At High Temperatures
Improving The Performance Of Biomass-Derived Carbons In Li-Ion Batteries By Controlling The Lithium Insertion Process
Use Of Small-Amplitude Oscillatory Shear Rheometry To Study The Flow Properties Of Pure And Potassium-Doped Li2zro3 Sorbents During The Sorption Of Co2 At High Temperatures
Novel Lithium-Based Sorbents From Fly Ashes For Co2 Capture At High Temperatures
Use Of Small-Amplitude Oscillatory Shear Rheometry To Study The Flow Properties Of Pure And Potassium-Doped Li2zro3 Sorbents During The Sorption Of Co2 At High Temperatures
Novel Lithium-Based Sorbents From Fly Ashes For Co2 Capture At High Temperatures
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Novel Lithium-Based Sorbents From Fly Ashes For Co2 Capture At High Temperatures
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Use Of Cork Agglomerates As Acoustic Absorbents
Estudio Tecnico Sobre La Rotura De Tubos De Presion De Pvc
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Modification Of Carbon Screen-Printed Electrodes By Adsorption Of Chemically Synthesized Bi Nanoparticles For The Voltammetric Stripping Detection Of Zn(Ii), Cd(Ii) And Pb(Ii)
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Modification Of Carbon Screen-Printed Electrodes By Adsorption Of Chemically Synthesized Bi Nanoparticles For The Voltammetric Stripping Detection Of Zn(Ii), Cd(Ii) And Pb(Ii)
Suppressing Irreversible Capacity In Low Cost Disordered Carbons For Li-Ion Batteries
Modification Of Carbon Screen-Printed Electrodes By Adsorption Of Chemically Synthesized Bi Nanoparticles For The Voltammetric Stripping Detection Of Zn(Ii), Cd(Ii) And Pb(Ii)
Suppressing Irreversible Capacity In Low Cost Disordered Carbons For Li-Ion Batteries
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
Suppressing Irreversible Capacity In Low Cost Disordered Carbons For Li-Ion Batteries
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Carbonización A Alta Temperatura De Sarmientos De Variedad Tempranillo Y Activación Con Koh Para La Eliminación De Metales Pesados Tóxicos En Aguas Residuales
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Carbonización A Alta Temperatura De Sarmientos De Variedad Tempranillo Y Activación Con Koh Para La Eliminación De Metales Pesados Tóxicos En Aguas Residuales
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Carbonización A Alta Temperatura De Sarmientos De Variedad Tempranillo Y Activación Con Koh Para La Eliminación De Metales Pesados Tóxicos En Aguas Residuales
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
A Novel Cell Design For The Improved Stripping Voltammetric Detection Of Zn(Ii), Cd(Ii), And Pb(Ii) On Commercial Screen-Printed Strips By Bismuth Codeposition In Stirred Solutions
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
A Novel Cell Design For The Improved Stripping Voltammetric Detection Of Zn(Ii), Cd(Ii), And Pb(Ii) On Commercial Screen-Printed Strips By Bismuth Codeposition In Stirred Solutions
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
A Novel Cell Design For The Improved Stripping Voltammetric Detection Of Zn(Ii), Cd(Ii), And Pb(Ii) On Commercial Screen-Printed Strips By Bismuth Codeposition In Stirred Solutions
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Tendencias En Adhesión Y Adhesivos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Tendencias En Adhesión Y Adhesivos
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Tendencias En Adhesión Y Adhesivos
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Sarmientos De La Vid: Material De Partida Para La Preparación De Carbón Activado Con Aplicaciones En La Industria Enológica
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Sarmientos De La Vid: Material De Partida Para La Preparación De Carbón Activado Con Aplicaciones En La Industria Enológica
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Sarmientos De La Vid: Material De Partida Para La Preparación De Carbón Activado Con Aplicaciones En La Industria Enológica
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Influence Of Ion Nitriding Process On The Properties Of Zirconia Coating Deposited On Stainless Steel
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Influence Of Ion Nitriding Process On The Properties Of Zirconia Coating Deposited On Stainless Steel
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Influence Of Ion Nitriding Process On The Properties Of Zirconia Coating Deposited On Stainless Steel
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Influence Of Zirconia Sol-Gel Coatings On The Fracture Strength Of Brittle Materials
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Comparación De La Depuración Y Metanización De Los Residuos De Un Matadero En Biodigestores De Mezcla Completa Continuo Y Discontinuo
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Ion Nitriding Of Zirconia Coated On Stainless Steel: Structure And Mechanical Properties
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Influence Of The Heat-Treatment On Thickness And Porosity Of Thin-Films Obtained By Sol-Gel Route
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Effect Of Sol-Gel Thin Coatings On The Fracture Strength Of Glass
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Controlled Preparation And Characterization Of Multilayer Sol-Gel Zirconia Dip-Coatings
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Multilayer Coatings Preparation Of Zirconia-Based By Sol-Gel Route; Microstructural And Mechanical Characterisation
Mechanical Properties Of Cork Under Contact Stresses
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Mechanical Properties Of Cork Under Contact Stresses
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Criterios Básicos Sobre Diseño Y Cálculo De Materiales Compuestos
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Criterios Básicos Sobre Diseño Y Cálculo De Materiales Compuestos
Reclado De Materiales
Criterios Básicos Sobre Diseño Y Cálculo De Materiales Compuestos
Reclado De Materiales
A Thermal And Ir Study Of Metal Complexes Of 2-Amino-2-Deoxy-D-Glycero-L-Gluco Heptonic Acid
Reclado De Materiales
A Thermal And Ir Study Of Metal Complexes Of 2-Amino-2-Deoxy-D-Glycero-L-Gluco Heptonic Acid
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
A Thermal And Ir Study Of Metal Complexes Of 2-Amino-2-Deoxy-D-Glycero-L-Gluco Heptonic Acid
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - Ii. Study Of Its Interaction With Zinc (Ii) And Cadmium (Ii)
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - Ii. Study Of Its Interaction With Zinc (Ii) And Cadmium (Ii)
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - I. Crystal Structure Of The Ligand And Study Of Its Interaction With Nickel(Ii)
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - Ii. Study Of Its Interaction With Zinc (Ii) And Cadmium (Ii)
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - I. Crystal Structure Of The Ligand And Study Of Its Interaction With Nickel(Ii)
Reactions Of Metal(Ii) Ions With Sugar Α-Amino Acids: Nickel(Ii) Complexes Containing An Α-Amino Acid Derived From Galactose Or Mannose
The Coordination Chemistry Of (2-Thiazolin-2-Yl)hydrazine Hydrochloride (Tzhyhcl) - I. Crystal Structure Of The Ligand And Study Of Its Interaction With Nickel(Ii)
Reactions Of Metal(Ii) Ions With Sugar Α-Amino Acids: Nickel(Ii) Complexes Containing An Α-Amino Acid Derived From Galactose Or Mannose
Equilibria Study Of Divalent Metal Ions With A Sugar Α-Amino Acid
Reactions Of Metal(Ii) Ions With Sugar Α-Amino Acids: Nickel(Ii) Complexes Containing An Α-Amino Acid Derived From Galactose Or Mannose
Equilibria Study Of Divalent Metal Ions With A Sugar Α-Amino Acid
Complexes Of Copper(Ii) With Sugar Α-Amino Acids As Ligands
Equilibria Study Of Divalent Metal Ions With A Sugar Α-Amino Acid
Complexes Of Copper(Ii) With Sugar Α-Amino Acids As Ligands
Complexing Of 6-Chloropurine With Some Transition Metal Ions In Aqueous Solution
Complexes Of Copper(Ii) With Sugar Α-Amino Acids As Ligands
Complexing Of 6-Chloropurine With Some Transition Metal Ions In Aqueous Solution
Spectroscopic Characterization And Thermal Behavior Of Two Sugar Α-Amino Acids
Complexing Of 6-Chloropurine With Some Transition Metal Ions In Aqueous Solution
Spectroscopic Characterization And Thermal Behavior Of Two Sugar Α-Amino Acids
Coordination Of Mercury(Ii) To Carbohydrate Α-Amino Acids Derived From Glucose And Mannose
Spectroscopic Characterization And Thermal Behavior Of Two Sugar Α-Amino Acids
Coordination Of Mercury(Ii) To Carbohydrate Α-Amino Acids Derived From Glucose And Mannose
Acid-Base And Complex-Forming Properties Of The Carbohydrate Α-Amino Acid 2-Benzylamino-2-Deoxy-D-Glycero-D-Talo-Heptonic Acid In Aqueous Solution
Coordination Of Mercury(Ii) To Carbohydrate Α-Amino Acids Derived From Glucose And Mannose
Acid-Base And Complex-Forming Properties Of The Carbohydrate Α-Amino Acid 2-Benzylamino-2-Deoxy-D-Glycero-D-Talo-Heptonic Acid In Aqueous Solution
Potentiometric Investigation Of The Complexation Of Divalent Metal Ions By A Sugar Α-Amino Acid
Acid-Base And Complex-Forming Properties Of The Carbohydrate Α-Amino Acid 2-Benzylamino-2-Deoxy-D-Glycero-D-Talo-Heptonic Acid In Aqueous Solution
Potentiometric Investigation Of The Complexation Of Divalent Metal Ions By A Sugar Α-Amino Acid
Complexes Of Two Mannose Α-Amino Acid Derivatives With Zinc And Cadmium
Potentiometric Investigation Of The Complexation Of Divalent Metal Ions By A Sugar Α-Amino Acid
Complexes Of Two Mannose Α-Amino Acid Derivatives With Zinc And Cadmium
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Complexes Of Two Mannose Α-Amino Acid Derivatives With Zinc And Cadmium
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Coordination Of Divalent Transition-Metal Ions To The Α-Amino Acid 2-Amino-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid In Aqueous Solution
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Coordination Of Divalent Transition-Metal Ions To The Α-Amino Acid 2-Amino-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid In Aqueous Solution
Metal Complexes Of 6-Chloropurine
Coordination Of Divalent Transition-Metal Ions To The Α-Amino Acid 2-Amino-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid In Aqueous Solution
Metal Complexes Of 6-Chloropurine
Equilibria In Aqueous Solution Between Divalent Cations And The Α-Amino Acid 2-(Benzylamino)-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid
Metal Complexes Of 6-Chloropurine
Equilibria In Aqueous Solution Between Divalent Cations And The Α-Amino Acid 2-(Benzylamino)-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid
La Programación De Máquinas-Herramienta Por Control Numérico
Equilibria In Aqueous Solution Between Divalent Cations And The Α-Amino Acid 2-(Benzylamino)-2-Deoxy-D-Glycero-D-Gulo-Heptonic Acid
La Programación De Máquinas-Herramienta Por Control Numérico
Thermal And Spectroscopic Study Of Some Metal Complexes Of 6-Chloropurine
La Programación De Máquinas-Herramienta Por Control Numérico
Thermal And Spectroscopic Study Of Some Metal Complexes Of 6-Chloropurine
Study Of Sulfur Introduction In Activated Carbon
Thermal And Spectroscopic Study Of Some Metal Complexes Of 6-Chloropurine
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Manufacture And Characterization Of Polymer Concrete Combining Inorganic And Organic Fillers
WEB ACCESIBLE