PUBLICACIÓN

3D Bioprinted Natural Hydrogels: Rheological Characterization, Cytotoxicity, and Printability Assessment of a Polysaccharide-Based Bioink

Logo Open Access

ACCEDER A LA PUBLICACIÓN: Scopus

Picado-Tejero D.; Mendoza-Cerezo L.; Rodriguez-Rego J.M.; Macias-Garcia A.; Marcos-Romero A.C.

2026 ACS Omega

CITAS

0

DOI

10.1021/acsomega.5c09668

EID

2-s2.0-105027775550

EISSN

2470-1343

AUTORES DE LA UEX

Jesús Manuel Rodríguez Rego

OTRAS PUBLICACIONES DE INTERÉS

Reacciones Químicas: Aspectos A Considerar
3d Bioprinted Natural Hydrogels: Rheological Characterization, Cytotoxicity, And Printability Assessment Of A Polysaccharide-Based Bioink
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Bioprinted Natural Hydrogels: Rheological Characterization, Cytotoxicity, And Printability Assessment Of A Polysaccharide-Based Bioink
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
Standardizing Electrical Conductivity Measurements Of Carbonaceous Materials In Supercapacitors Via An Innovative 3d-Printed Method
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
3d Printing Of Carbonaceous Hydrogel Electrodes For Energy Applications
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
New Electrical Method For Obtaining Graphic Information On The Evaluation Of The Uniformity Of Zro2-3 Mol% And Y2o3 Coatings Deposited By Electrophoresis. Application In Protection And Finishing Of Dental Parts
Analysis Of Attention Deficit In Adhd In The School Population
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
Analysis Of Attention Deficit In Adhd In The School Population
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
Study Of Printable And Biocompatible Alginate–carbon Hydrogels For Sensor Applications: Mechanical, Electrical, And Cytotoxicity Evaluation
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
A New Multitech Bioprinter For High Precision Triple Negative Breast Cancer Modeling
Optimizing The Design Of A Lateral Oscillating Device For Pressure Ulcer Prevention: Results Of A Quasi-Experimental Study
A New Multitech Bioprinter For High Precision Triple Negative Breast Cancer Modeling
From Medical Imaging To Bioprinted Tissues: The Importance Of Workflow Optimisation For Improved Cell Function
A New Multitech Bioprinter For High Precision Triple Negative Breast Cancer Modeling
From Medical Imaging To Bioprinted Tissues: The Importance Of Workflow Optimisation For Improved Cell Function
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
From Medical Imaging To Bioprinted Tissues: The Importance Of Workflow Optimisation For Improved Cell Function
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Recent Advances In 3d Bioprinting Of Porous Scaffolds For Tissue Engineering: A Narrative And Critical Review
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Predictive Modeling And Experimental Optimization Of The Electrodeposition–sintering Process For Functional Ceramic Coatings
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Study Of Additives Designed In 3d To Lighten Synthetic Marbles
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Design And Manufacture Of 3d Bioprinting Optimisation Tools Using Additive Manufacturing Technologies
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Three-Dimensional Bioprinting Of Gelma Hydrogels With Culture Medium: Balancing Printability, Rheology And Cell Viability For Tissue Regeneration
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Odour Characterisation Of High-Density Polyethylene Recycled With Sepiolite By Sensory Evaluation
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Optimising Bioprinting Nozzles Through Computational Modelling And Design Of Experiments
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Innovative Device For Crack Monitoring And Deflection Analysis In Structures: Improved Accuracy, Safety And Efficiency
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Combination Of Review And Design Of Experiments To Optimize Computational Simulations On Bioprinting Nozzles
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Odour Characterisation Of Recycled Hdpe In Different Washing And Processing Processes
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Environmental Impact Of Solar Salt As A Heat Transfer Fluid For Csp Plants
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comparison Of The Potential For Bioprinting Of Different 3d Printing Technologies
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Zirconia-Based Coatings For The Protection Of Ferritic-Martensitic Steels In A Molten Salt Environment For Csp Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Comprehensive Educational Model Based On Challenge-Based Learning For The Improvement Of Competency Performance
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Relationship Between Rheological Properties Of Hydrogels, Bioprinting Parameters And 3d Scanner Technology
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Rheological Characterisation Of Different Alginate-Based Hydrogels For A Biomimetic Representation Of A Tooth
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Guide For The Development And Evaluation Of Supercapacitors With The Proposal Of A Novel Design To Improve Their Performance
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Study Of The Influence Of The Type Of Pores Present In The Electrodes On The Behaviour Of A Swagelok-Type Supercapacitor
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Evolution Of Bioprinting And Current Applications
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Analysis Of The Use Of Hydrogels In Bioprinting
Fabrication And Characterisation Of Bioglass And Hydroxyapatite-Filled Scaffolds
Analysis Of The Use Of Hydrogels In Bioprinting
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Analysis Of The Use Of Hydrogels In Bioprinting
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Design, Machining And Characterization Of The Components Required For The Manufacture Of A Supercapacitor
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Application Of Bioprinting To Reverse-Engineered Dental Implants
Test Device For The Optimisation Of 3d Bioprinting
Methodology For Characterizing The Printability Of Hydrogels
Test Device For The Optimisation Of 3d Bioprinting
Methodology For Characterizing The Printability Of Hydrogels
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Methodology For Characterizing The Printability Of Hydrogels
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Electrochemical Impedance Analysis For Corrosion Rate Monitoring Of Sol–gel Protective Coatings In Contact With Nitrate Molten Salts For Csp Applications
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Relationship Between Shear-Thinning Rheological Properties Of Bioinks And Bioprinting Parameters
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Dispositivo Para El Control De Grietas En Edificios Y Pruebas De Carga Y Descarga.
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Actions To Reduce Carbon Footprint In Materials To Healthcare Buildings
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Design, Preparation, And Characterization Of Yttria-Stabilized Zirconia (Ysz) Coatings Obtained By Electrophoretic Deposition (Epd)
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Development Of A Device For The Control Of Variables In The Bioprinting Of Hydrogels
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Desarrollo De Un Dispositivo Para El Control De Variables En La Bioimpresión De Hidrogeles
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Design Of An Action Protocol For Bioconstruction
Mechanical Properties And Thermal Shock In Thin Zro2–y2o3–al2o3 Films Obtained By The Sol-Gel Method
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Design Of An Action Protocol For Bioconstruction
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Design Of An Action Protocol For Bioconstruction
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Hydrogels For Bioprinting: A Systematic Review Of Hydrogels Synthesis, Bioprinting Parameters, And Bioprinted Structures Behavior
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Influence Of Chemical Composition, Porosity And Fractal Dimension On The Electrical Conductivity Of Carbon Blacks
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Charcoal Obtained From Cherry Stones In Different Carbonization Atmospheres
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Granulated Cork With Bark Characterised As Environment-Friendly Lightweight Aggregate For Cement Based Materials
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Comparision Of New Experimental Data And Predictions By The Coupled Criterion Of Ffm For Brittle Fracture Of V-Notched Tpb Specimens
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Study Of The Influence Of Particle Size Of Activate Carbon For The Manufacture Of Electrodes For Supercapacitors
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Preparation And Characterization Of Multilayer Coatings On Tool Steel
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Preparation Of Activated Carbon From Kenaf By Activation With H3po4. Kinetic Study Of The Adsorption/electroadsorption Using A System Of Supports Designed In 3d, For Environmental Applications
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Adsorption Of Paracetamol In Hospital Wastewater Through Activated Carbon Filters
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
Corrosion Resistance Of Protective Coatings Against Molten Nitrate Salts For Thermal Energy Storage And Their Environmental Impact In Csp Technology
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Metodología De Mentoría Para Profesores Noveles: Escuela De Ingenierías Industriales, Badajoz
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
El Ángulo Crítico De Entallas En Forma De V En Los Ensayos De Flexión En Tres Puntos
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Preparation And Characterization Of Zro2/y2o3/al2o3-Based Microstructured Multilayer Sol–gel Coatings
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Study Of The Adsorption And Electroadsorption Process Of Cu (Ii) Ions Within Thermally And Chemically Modified Activated Carbon
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Effect Of Withdrawal Rate On The Evolution Of Optical Properties Of Dip-Coated Yttria-Doped Zirconia Thin Films
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Caracterización De Ground Tire Rubber Y Crumb Tire Rubber Mediante Modelos Matemáticos
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Characterization Of Sol-Gel Coatings Deposited On A Mechanically Treated Stainless Steel By Using A Simple Non-Destructive Electrical Method
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Preparation Of Activated Carbon-Sno2, Tio2, And Wo3 Catalysts. Study By Ft-Ir Spectroscopy
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Modelling The Compression Behavior Of Ground Tire Rubber
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Temperature Dependence Of The Electrical Conductivity Of Activated Carbons Prepared From Vine Shoots By Physical And Chemical Activation Methods
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
Influence Of The Quality And Uniformity Of Ceramic Coatings On Corrosion Resistance
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Conductivity Of Activated Carbon-Metal Oxide Nanocomposites Under Compression: A Comparison Study
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
The Excellent Mechanical Properties Of Cork: A Novel Approach Through The Analysis Of Contact Stress
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Electrical Resistivity Of Ysz-Coated Stainless Steel Electrodes. A Study By Response Surface Methodology
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Preparation Of Micropore-Containing Adsorbents From Kenaf Fibers And Their Use In Mercury Removal From Aqueous Solution
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbon From Cherry Stones By Physical Activation In Air. Influence Of The Chemical Carbonisation With H2so4
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Development And Characterization Of Carbon-Honeycomb Monoliths From Kenaf Natural Fibers: A Preliminary Study
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. Ii. Physical Activation With Air
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Preparation Of Activated Carbons From Olive-Tree Wood Revisited. I. Chemical Activation With H3po4
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
A Novel Strategy For The Preparation Of Yttria-Stabilized Zirconia Powders: Deposition And Scratching Of Thin Films Obtained By The Sol-Gel Method
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Tailoring The Properties Of Yttria-Stabilized Zirconia Powders Prepared By The Sol-Gel Method For Potential Use In Solid Oxide Fuel Cells
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Shock Resistance And Compression Analysis Of Concrete In Expanded Polystyrene Formworks (Epsfws)
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
On The Thermal Characterization Of Fibers Prepared By Cryogenic Grinding Of Scrap Tires
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Use Of Cork Agglomerates As Acoustic Absorbents
Influence Of The Experimental Parameters On The Synthesis Process Of Yttria-Doped Zirconia Sol-Gel Films
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Use Of Cork Agglomerates As Acoustic Absorbents
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Characterisation Of Elastomer Prepared From Ground Tyre Rubber: Morphological And Granulometric Study
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Fabricación De Una Célula De Medidas Eléctricas Para Materiales Cerámicos
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
Fabricación De Recubrimientos Multicapa Para Aplicaciones En Útiles De Mecanizado
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Cherry Stones As Precursor Of Activated Carbons For Supercapacitors
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
The Development Of An Activated Carbon From Cherry Stones And Its Use In The Removal Of Ochratoxin A From Red Wine
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Adsorption Of Zn(Ii) In Aqueous Solution By Activated Carbons Prepared From Evergreen Oak (Quercus Rotundifolia L.)
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Uptake Of Lead By Carbonaceous Adsorbents Developed From Tire Rubber
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Adsorption Of Mercury From Single And Multicomponent Metal Systems On Activated Carbon Developed From Cherry Stones
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Production Of Activated Carbons From Coffee Endocarp By Co2 And Steam Activation
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Utilización De Residuos Agroindustriales Y Sintéticos Generados En La Comunidad Autónoma De Extremadura Para La Preparación De Absorbentes Carbonosos
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Aprovechamiento De La Goma De Neúmatico Para La Preparación De Adsorbentes Carbonosos
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Study Of Thermal Degradation Kinetics Of Elastomeric Powder (Ground Tire Rubber)
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Porous Structure Of Activated Carbon Prepared From Cherry Stones By Chemical Activation With Phosphoric Acid
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Preparation And Characterization Of Activated Carbons By Activation With H3po4
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Retención De Mercurio Por Carbón Activado Preparado A Partir De Residuos Agroindustriales
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Energetic Exploitation Of Vine Shoot By Gasification Processes. A Preliminary Study
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Hydrogen Peroxide: Study Of Their Porous Texture
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Preface
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Preparation Of Activated Carbons Previously Treated With Sulfuric Acid. A Study Of Their Adsorption Capacity In Solution
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Determination Of The Fractal Dimension Of Activated Carbons: Two Alternative Methods
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Determination Of The Energy Potential Of Gases Produced In The Pyrolysis Processes Of The Vegetal Carbon Manufacture Industry
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Thermal Behaviour Of Lignocellulosic Material In The Presence Of Phosphoric Acid. Influence Of The Acid Content In The Initial Solution
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Preparation Of Activated Carbon From Cherry Stones By Chemical Activation With Zncl 2
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation And Textural Characterisation Of Activated Carbon From Vine Shoots (Vitis Vinifera) By H 3 Po 4 -Chemical Activation
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Study Of The Pore Size Distribution And Fractal Dimension Of Hno 3 -Treated Activated Carbons
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Preparation Of Activated Carbons From Cherry Stones By Activation With Potassium Hydroxide
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation And Characterization Of Activated Carbons From Impregnation Pitch By Zncl 2
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Influence Of The Type Of Solvent On The Textural Evolution Of Yttria Stabilized Zirconia Powders Obtained By The Sol-Gel Method: Characterization And Study Of The Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Walnut Wood: A Study Of Microporosity And Fractal Dimension
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Preparation Of Activated Carbons From Chestnut Wood By Phosphoric Acid-Chemical Activation. Study Of Microporosity And Fractal Dimension
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Development Of Activated Carbon Using Vine Shoots (Vitis Vinifera) And Its Use For Wine Treatment
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Adsorption Of Mercury By Carbonaceous Adsorbents Prepared From Rubber Of Tyre Wastes
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Preparation And Characterization Activated Carbon Obtained From Black Broom
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Optimizing The Application Of Infrared Spectroscopy For The Study Of Carbonaceous Materials
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Electrical Conductivity Of Carbon Blacks Under Compression
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Tratamiento De Vinos Tintos Españoles Con Carbón Activado Preparado A Partir De Sarmientos De Vid: Evaluación Del Efecto Sobre El Contenido En Ota Y La Composición Polifenólica
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Influence Of The Cooling Circulation Water On The Efficiency Of A Thermonuclear Plant
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Porous Texture Of Activated Carbons Prepared By Phosphoric Acid Activation Of Woods
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Physico-Chemical Properties Of Low-Rank Coals: Thermal And Demineralisation Effects
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Application Of The Rosin-Rammler And Gates-Gaudin-Schuhmann Models To The Particle Size Distribution Analysis Of Agglomerated Cork
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Estudio Granulométrico De Regranulados Negros De Residuos De Corcho Y Su Aplicación Industrial
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Adsorption Of Pb2+ In Aqueous Solution By So2-Treated Activated Carbon
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Preparation Of Mesoporous And Macroporous Materials From Rubber Of Tyre Wastes
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Preparation Of Activated Carbons From Bituminous Coal Pitches
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Determination Of Gels Molecular Structure By Computational Calculations
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Influence Of Ph Value And Solvent Utilized In The Sol-Gel Synthesis On Properties Of Derived Zro2 Powders
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Preparation Of Active Carbons From A Commercial Holm-Oak Charcoal: Study Of Micro- And Meso-Porosity
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Preparation And Characterization Of Activated Carbons Made Up From Different Woods By Chemical Activation With H3po4
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Adsorption Of Cadmium By Sulphur Dioxide Treated Activated Carbon
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Carbonization And Demineralization Of Coals: A Study By Means Of Ft-Ir Spectroscopy
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Theoretical Study Of The Molecular Structure For Zirconium Complexes
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Of Black And Composite Agglomerates Of Cork As Thermal Insulating Materials
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Bending Strength Of Black And Composite Agglomerates Of Cork
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Study Granulometric And Their Application To The Industrial Processes Of Cork Residuals And Cork Of Low Quality
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Relaxation Modulus In Pmma And Ptfe Fitting By Fractional Maxwell Model
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Preparation Of A Cation Exchanger From Cork Waste: Thermodynamic Study Of The Ion Exchange Processes
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Aplicaciones Del Carbón Vegetal A Partir Del Estudio De La Madera Utilizada
Reclado De Materiales
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Reclado De Materiales
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Adsorption Of Mercury, Cadmium And Lead From Aqueous Solution On Heat-Treated And Sulphurized Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Adsorption Of Pb2+ By Heat-Treated And Sulfurized Activated Carbon
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
Study Of Sulfur Introduction In Activated Carbon
Reacciones Químicas: Aspectos A Considerar
3d Bioprinted Natural Hydrogels: Rheological Characterization, Cytotoxicity, And Printability Assessment Of A Polysaccharide-Based Bioink
WEB ACCESIBLE