PUBLICACIÓN

Enhancing the Electrochemical Performance of NaCrO2through Structural Defect Control

ACCEDER A LA PUBLICACIÓN: Scopus Orcid

Luo M.; Ortiz A.L.; Shaw L.L.

2020 ACS Applied Energy Materials

Chemical Engineering (miscellaneous) (Q1), Electrical and Electronic Engineering (Q1), Electrochemistry (Q1), Energy Engineering and Power Technology (Q1), Materials Chemistry (Q1)

JCR: 6.024

SJR: 1.833

CITAS

16

DOI

10.1021/acsaem.0c01302

EID

2-s2.0-85091077758

EISSN

2574-0962

BIBTEX

@article{Ortiz2020,title = {Enhancing the Electrochemical Performance of NaCrO<inf>2</inf>through Structural Defect Control},journal = {ACS Applied Energy Materials},year = {2020},volume = {3},number = {7},pages = {7216-7227},author = {Luo, M. and Ortiz, A.L. and Shaw, L.L.}}

AUTORES DE LA UEX

Ángel Luis Ortiz Seco

OTRAS PUBLICACIONES DE INTERÉS

Aplicación Del Método Rietveld Al Análisis Cuantitativo Sic Sinterizado En Fase Líquida
A Comparison Of The Corrosion Behaviour Over Time In 0.5 M Nacl Environment Of Ticn Spark Plasma Sintered With And Without Si Aids
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
A Comparison Of The Corrosion Behaviour Over Time In 0.5 M Nacl Environment Of Ticn Spark Plasma Sintered With And Without Si Aids
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Processing Of Novel Zrb2-Inconel 718 Cermets By Freeze Casting And Pressureless Spark Plasma Sintering
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Corrigendum To “effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder” [Ceram. Int. 51 (2025) 3115–3125, (S0272884224053860), (10.1016/j.ceramint.2024.11.287)]
Compressive Strength As A Screening Tool For Quality Control Of Tubular Honeycomb Ceramic Filters
Corrigendum To “effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder” [Ceram. Int. 51 (2025) 3115–3125, (S0272884224053860), (10.1016/j.ceramint.2024.11.287)]
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Corrigendum To “effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder” [Ceram. Int. 51 (2025) 3115–3125, (S0272884224053860), (10.1016/j.ceramint.2024.11.287)]
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Retraction Notice To “influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity” [Materials Characterization, Vol 182 (2021) 111536] (Materials Characterization (2021) 182, (S1044580321006586), (10.1016/j.matchar.2021.111536))
Production Of Complex Microchanneled Parts Of Zrb2-Mosi2 Ultra-High Temperature Ceramics By Freeze Casting And Pressureless Spark Plasma Sintering
Retraction Notice To “influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity” [Materials Characterization, Vol 182 (2021) 111536] (Materials Characterization (2021) 182, (S1044580321006586), (10.1016/j.matchar.2021.111536))
Effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder
Retraction Notice To “influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity” [Materials Characterization, Vol 182 (2021) 111536] (Materials Characterization (2021) 182, (S1044580321006586), (10.1016/j.matchar.2021.111536))
Effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Effect Of Ni Aids On The Unlubricated Tribological Behaviour Of Wc Cemented Carbides Fabricated By Pressureless Infiltration Of Cu Alloy Binder
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Low-Temperature Pressureless Sintering B4c With Si Aids: Is It Feasible?
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Corrigendum To “evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications” [Ceram. Int. 50 (2024) 7441–7450, (S0272884223039330), (10.1016/j.ceramint.2023.12.033)]
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Corrigendum To “novel B4c Supports For Ceramic Membrane Filtration” [Ceram. Int. 50 (2024) 50436–50443, (S0272884224044249), (10.1016/j.ceramint.2024.09.389)]
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Reactive Spark Plasma Sintering Of Ultrahard Wear-Resistant Boron Carbide-Sic-Tab2 Composites From B4c With Tasi2 Aids
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Wear Of The Ultrahard B4c–sic–tib2 Ceramic Composite In Unlubricated Sliding Contact With Ceramic Counter-Parts
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Evaluating The Mechanical Integrity And Reliability Of Multi-Channelled Flat-Sheet Ceramic Membranes For Filtration Applications
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Novel B4c Supports For Ceramic Membrane Filtration
Spark Plasma Sintering Of Hard Wear-Resistant Graphene Nanoplatelet–reinforced Tib2 + Sic Composites From Tic–b4c–sic
Novel B4c Supports For Ceramic Membrane Filtration
Affordable Spark Plasma Sintering Of Superhard Al-Doped Zrb2 Nanoceramics From Zrh2, B, And Al Mechanically Activated By Shaker Milling
Novel B4c Supports For Ceramic Membrane Filtration
Affordable Spark Plasma Sintering Of Superhard Al-Doped Zrb2 Nanoceramics From Zrh2, B, And Al Mechanically Activated By Shaker Milling
Fabricating Exotic Boron Carbide Ceramics By Shaker Milling And Reactive Spark Plasma Sintering Of B And C: Application To The Elusive B6c
Affordable Spark Plasma Sintering Of Superhard Al-Doped Zrb2 Nanoceramics From Zrh2, B, And Al Mechanically Activated By Shaker Milling
Fabricating Exotic Boron Carbide Ceramics By Shaker Milling And Reactive Spark Plasma Sintering Of B And C: Application To The Elusive B6c
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Fabricating Exotic Boron Carbide Ceramics By Shaker Milling And Reactive Spark Plasma Sintering Of B And C: Application To The Elusive B6c
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Transient Liquid-Phase Assisted Low-Temperature Spark Plasma Sintering Of Ticn With Si Aids
Fabricating Ultrahard Boron Carbide–silicon Carbide–zirconium Diboride Composites By Spark Plasma Sintering From B4c With Zrsi2 Aids
Transient Liquid-Phase Assisted Low-Temperature Spark Plasma Sintering Of Ticn With Si Aids
Processing Of Zrb2 Tribo-Ceramics By Reactive Spark Plasma Sintering Of Zrh2+2b Subjected To High-Energy Pre-Ball-Milling
Transient Liquid-Phase Assisted Low-Temperature Spark Plasma Sintering Of Ticn With Si Aids
Processing Of Zrb2 Tribo-Ceramics By Reactive Spark Plasma Sintering Of Zrh2+2b Subjected To High-Energy Pre-Ball-Milling
Modelling The States Of Minimum And Maximum Disorder In B4c Ceramics: Which One Is Expected In Spark Plasma Sintered Boron Carbide?
Processing Of Zrb2 Tribo-Ceramics By Reactive Spark Plasma Sintering Of Zrh2+2b Subjected To High-Energy Pre-Ball-Milling
Modelling The States Of Minimum And Maximum Disorder In B4c Ceramics: Which One Is Expected In Spark Plasma Sintered Boron Carbide?
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
Modelling The States Of Minimum And Maximum Disorder In B4c Ceramics: Which One Is Expected In Spark Plasma Sintered Boron Carbide?
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
A Simple Procedure For Accurately Assessing The Stoichiometry And Structural Disorder Of Tin Ceramics By X-Ray Diffractometry
Effect Of The Degree Of Densification On The Unlubricated Sliding-Wear Behaviour Of Monolithic B4c Ceramics
A Simple Procedure For Accurately Assessing The Stoichiometry And Structural Disorder Of Tin Ceramics By X-Ray Diffractometry
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
A Simple Procedure For Accurately Assessing The Stoichiometry And Structural Disorder Of Tin Ceramics By X-Ray Diffractometry
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Scratch, Fretting, And Sliding Wear Of A Zrb2–hardened Zr3al2 Intermetallic–ceramic Composite
Solid-State Spark Plasma Sintering Of Super Wear Resistant B4c–sic–tib2 Triplex-Particulate Composites
Scratch, Fretting, And Sliding Wear Of A Zrb2–hardened Zr3al2 Intermetallic–ceramic Composite
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Scratch, Fretting, And Sliding Wear Of A Zrb2–hardened Zr3al2 Intermetallic–ceramic Composite
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Unlubricated Sliding Wear Of B4c Composites Spark-Plasma Sintered With Si Aids And Of Their Reference B4c Monoliths
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Quantifying Structural Disorder In Spinels By X-Ray Diffractometry Through Constrained–restrained Rietveld Refinements
Optical And Mechanical Characterization Of Sol-Gel Thin Films Of Zro2 Stabilized With Different Y2o3-Doping Mol%
Quantifying Structural Disorder In Spinels By X-Ray Diffractometry Through Constrained–restrained Rietveld Refinements
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Quantifying Structural Disorder In Spinels By X-Ray Diffractometry Through Constrained–restrained Rietveld Refinements
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Fabrication Of B4c Ultrafiltration Membranes On Sic Supports
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Powder-Metallurgy Fabrication Of Zrb2-Hardened Zr3al2intermetallic Composites By High-Energy Ball-Milling And Reactive Spark-Plasma Sintering
Sliding-Wear Performance Of Zrc–co: A Comparative Assessment Under Dry And Neutral/non-Neutral Wet Media
Powder-Metallurgy Fabrication Of Zrb2-Hardened Zr3al2intermetallic Composites By High-Energy Ball-Milling And Reactive Spark-Plasma Sintering
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
Powder-Metallurgy Fabrication Of Zrb2-Hardened Zr3al2intermetallic Composites By High-Energy Ball-Milling And Reactive Spark-Plasma Sintering
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Spark-Plasma Sintering Of Boron Carbide–silicon Carbide Composites At 1400 °c From B4c+si: Densification And Sintering/reaction Mechanisms
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Ultra-Low Temperature Spark Plasma Sintering Of Super Wear-Resistant Hard B4c Composites
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Fabrication Of Ultrafine-Grained Zrc–co Cemented Carbides With Superior Sliding-Wear Resistance From Micrometre Starting Powders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
Microstructural Development During Crystallization Firing Of A Dental-Grade Nanostructured Lithia-Zirconia Glass-Ceramic
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Transient Liquid-Phase Assisted Spark-Plasma Sintering And Dry Sliding Wear Of B4c Ceramics Fabricated From B4c Nanopowders
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity
A Critical Comparison Of The Tribocorrosive Performance In Highly-Alkaline Wet Medium Of Ultrafine-Grained Wc Cemented Carbides With Co, Co+ni, Or Co+ni+cr Binders
Influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity
Aqueous Tape Casting Of Super-Hard B4c Laminates With Rgo-Enriched Reinforcing Interlayers
Influence Of Pr3+ Doping On The Synthesis Of Colloidal Sols And Nanoparticulate Tio2 Xerogels And Their Photocatalytic Activity
Aqueous Tape Casting Of Super-Hard B4c Laminates With Rgo-Enriched Reinforcing Interlayers
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Aqueous Tape Casting Of Super-Hard B4c Laminates With Rgo-Enriched Reinforcing Interlayers
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Effect Of 1-D And 2-D Carbon-Based Nano-Reinforcements On The Dry Sliding-Wear Behaviour Of 3y-Tzp Ceramics
Ultra-Low Wear B4c-Sic-Mob2 Composites Fabricated At Lower Temperature From B4c With Mosi2 Additives
Effect Of 1-D And 2-D Carbon-Based Nano-Reinforcements On The Dry Sliding-Wear Behaviour Of 3y-Tzp Ceramics
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Effect Of 1-D And 2-D Carbon-Based Nano-Reinforcements On The Dry Sliding-Wear Behaviour Of 3y-Tzp Ceramics
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sintering And Dry Sliding-Wear Of Zrc-16.7 Vol.% Co Cemented Carbides
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Effect Of High-Energy Ball-Milling On The Spark Plasma Sinterability Of Zrb2 With Transition Metal Disilicides
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Spark Plasma Sinterability And Dry Sliding-Wear Resistance Of Wc Densified With Co, Co+ni, And Co+ni+cr
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
Pressureless Ultrafast Sintering Of Near-Net-Shaped Superhard Isotropic B4c/rgo Composites With Ti-Al Additives
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Processing Of Orthotropic And Isotropic Superhard B4c Composites Reinforced With Reduced Graphene Oxide
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
An In Situ And Ex Situ Study Of The Microstructural Evolution Of A Novel Lithium Silicate Glass-Ceramic During Crystallization Firing
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Enhancing The Electrochemical Performance Of Nacro2through Structural Defect Control
Manufacturing B4c Parts With Ti-Al Intermetallics By Aqueous Colloidal Processing
Enhancing The Electrochemical Performance Of Nacro2through Structural Defect Control
Influence Of Nd3+ Doping On The Structure, Thermal Evolution And Photoluminescence Properties Of Nanoparticulate Tio2 Xerogels
Enhancing The Electrochemical Performance Of Nacro2through Structural Defect Control
Influence Of Nd3+ Doping On The Structure, Thermal Evolution And Photoluminescence Properties Of Nanoparticulate Tio2 Xerogels
A Comparative Study Of The Dry Sliding Wear Of Wc-10wt.%(Co+fe+ni) Cemented Carbides Pressureless Sintered With Different Fe/co Ratios
Influence Of Nd3+ Doping On The Structure, Thermal Evolution And Photoluminescence Properties Of Nanoparticulate Tio2 Xerogels
A Comparative Study Of The Dry Sliding Wear Of Wc-10wt.%(Co+fe+ni) Cemented Carbides Pressureless Sintered With Different Fe/co Ratios
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
A Comparative Study Of The Dry Sliding Wear Of Wc-10wt.%(Co+fe+ni) Cemented Carbides Pressureless Sintered With Different Fe/co Ratios
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Bioinspired Design Of Triboceramics: Learning From The Anisotropic Micro-Fracture Response Of Dental Enamel Under Sliding Contact
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Fracture, Fatigue, And Sliding-Wear Behavior Of Nanocomposites Of Alumina And Reduced Graphene-Oxide
Improving The Dry Sliding-Wear Resistance Of B4c Ceramics By Transient Liquid-Phase Sintering
Fracture, Fatigue, And Sliding-Wear Behavior Of Nanocomposites Of Alumina And Reduced Graphene-Oxide
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Fracture, Fatigue, And Sliding-Wear Behavior Of Nanocomposites Of Alumina And Reduced Graphene-Oxide
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Highly Sliding-Wear Resistant B4c Composites Fabricated By Spark-Plasma Sintering With Ti–al Additives
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Influence Of Substrate And Sintering Temperature On The Thickness And Number Of Layers Of 3ysz Multilayer Sol-Gel Coatings
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Mechanical Activation Enhanced Solid-State Synthesis Of Nacro2 Cathode Material
Fabricating Toughened Super-Hard B 4 C Composites At Lower Temperature By Transient Liquid-Phase Assisted Spark Plasma Sintering With Mosi 2 Additives
Mechanical Activation Enhanced Solid-State Synthesis Of Nacro2 Cathode Material
Unraveling Processing-Structure-Electrical Conductivity Relationships Of Nacro2 Cathodes For Na-Ion Batteries
Mechanical Activation Enhanced Solid-State Synthesis Of Nacro2 Cathode Material
Unraveling Processing-Structure-Electrical Conductivity Relationships Of Nacro2 Cathodes For Na-Ion Batteries
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Unraveling Processing-Structure-Electrical Conductivity Relationships Of Nacro2 Cathodes For Na-Ion Batteries
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Microstructural Development During Heat Treatment Of A Commercially Available Dental-Grade Lithium Disilicate Glass-Ceramic
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Effect Of Sintering Duration On The Sliding-Wear Resistance Of 3y-Tzp Dental Ceramics
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Reinforcing 13–93 Bioglass Scaffolds Fabricated By Robocasting And Pressureless Spark Plasma Sintering With Graphene Oxide.
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Processing And Electrical Conductivity Of Non-Stoichiometric Lanthanum Strontium Manganite Perovskites Prepared From Powders Synthesized By A Polymerizable-Complexation Route
Evaluating Nanocrystallite Size Distributions In Doped And Undoped Nanocrystalline Ceramics By X-Ray Diffractometry
Processing And Electrical Conductivity Of Non-Stoichiometric Lanthanum Strontium Manganite Perovskites Prepared From Powders Synthesized By A Polymerizable-Complexation Route
Structural-Microstructural Characterization And Optical Properties Of Eu3+,tb3+-Codoped Lapo4·nh2o And Lapo4 Nanorods Hydrothermally Synthesized With Microwaves
Processing And Electrical Conductivity Of Non-Stoichiometric Lanthanum Strontium Manganite Perovskites Prepared From Powders Synthesized By A Polymerizable-Complexation Route
Structural-Microstructural Characterization And Optical Properties Of Eu3+,tb3+-Codoped Lapo4·nh2o And Lapo4 Nanorods Hydrothermally Synthesized With Microwaves
Some Crystallographic Considerations On The Novel Orthorhombic Zro2 Stabilized With Ta Doping
Structural-Microstructural Characterization And Optical Properties Of Eu3+,tb3+-Codoped Lapo4·nh2o And Lapo4 Nanorods Hydrothermally Synthesized With Microwaves
Some Crystallographic Considerations On The Novel Orthorhombic Zro2 Stabilized With Ta Doping
High-Temperature Compressive Creep Of Novel Fine-Grained Orthorhombic Zro2 Ceramics Stabilized With 12 Mol% Ta Doping
Some Crystallographic Considerations On The Novel Orthorhombic Zro2 Stabilized With Ta Doping
High-Temperature Compressive Creep Of Novel Fine-Grained Orthorhombic Zro2 Ceramics Stabilized With 12 Mol% Ta Doping
An Interplay Between Electronic And Structural Effects On The Photoluminescence Decay Mechanisms In Lapo4·: N H2o:tb3+ And Lapo4:tb3+ Single-Crystal Nanorods
High-Temperature Compressive Creep Of Novel Fine-Grained Orthorhombic Zro2 Ceramics Stabilized With 12 Mol% Ta Doping
An Interplay Between Electronic And Structural Effects On The Photoluminescence Decay Mechanisms In Lapo4·: N H2o:tb3+ And Lapo4:tb3+ Single-Crystal Nanorods
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
An Interplay Between Electronic And Structural Effects On The Photoluminescence Decay Mechanisms In Lapo4·: N H2o:tb3+ And Lapo4:tb3+ Single-Crystal Nanorods
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Sliding-Wear Resistance Of Pure Near Fully-Dense B4c Under Lubrication With Water, Diesel Fuel, And Paraffin Oil
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Fabricating Geometrically-Complex B4c Ceramic Components By Robocasting And Pressureless Spark Plasma Sintering
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Preparation, Thermal And Phase Evolution And Functional Properties Of Non-Stoichiometric Strontium-Doped Lanthanum Manganite Perovskite Ceramics
Fabricating Eco-Friendly Nanocomposites Of Sic With Morphologically-Different Nano-Carbonaceous Phases
Preparation, Thermal And Phase Evolution And Functional Properties Of Non-Stoichiometric Strontium-Doped Lanthanum Manganite Perovskite Ceramics
Ceramics Of Ta-Doping Stabilized Orthorhombic Zro2 Densified By Spark Plasma Sintering And The Effect Of Post-Annealing In Air
Preparation, Thermal And Phase Evolution And Functional Properties Of Non-Stoichiometric Strontium-Doped Lanthanum Manganite Perovskite Ceramics
Ceramics Of Ta-Doping Stabilized Orthorhombic Zro2 Densified By Spark Plasma Sintering And The Effect Of Post-Annealing In Air
Liquid-Phase Assisted Flash Sintering Of Sic From Powder Mixtures Prepared By Aqueous Colloidal Processing
Ceramics Of Ta-Doping Stabilized Orthorhombic Zro2 Densified By Spark Plasma Sintering And The Effect Of Post-Annealing In Air
Liquid-Phase Assisted Flash Sintering Of Sic From Powder Mixtures Prepared By Aqueous Colloidal Processing
Structural-Defect-Controlled Electrochemical Performance Of Sodium Ion Batteries With Nacro2 Cathodes
Liquid-Phase Assisted Flash Sintering Of Sic From Powder Mixtures Prepared By Aqueous Colloidal Processing
Structural-Defect-Controlled Electrochemical Performance Of Sodium Ion Batteries With Nacro2 Cathodes
Raman Characterization And Photoluminescence Properties Of La1-Xtbxpo4·nh2o And La1-Xtbxpo4 Phosphor Nanorods Prepared By Microwave-Assisted Hydrothermal Synthesis
Structural-Defect-Controlled Electrochemical Performance Of Sodium Ion Batteries With Nacro2 Cathodes
Raman Characterization And Photoluminescence Properties Of La1-Xtbxpo4·nh2o And La1-Xtbxpo4 Phosphor Nanorods Prepared By Microwave-Assisted Hydrothermal Synthesis
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Raman Characterization And Photoluminescence Properties Of La1-Xtbxpo4·nh2o And La1-Xtbxpo4 Phosphor Nanorods Prepared By Microwave-Assisted Hydrothermal Synthesis
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Reinforcement With Reduced Graphene Oxide Of Bioactive Glass Scaffolds Fabricated By Robocasting
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Near-Net Shape Manufacture Of B4c–co And Zrc–co Composites By Slip Casting And Pressureless Sintering
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Comminution Of B4c Powders With A High-Energy Mill Operated In Air In Dry Or Wet Conditions And Its Effect On Their Spark-Plasma Sinterability
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Liquid-Phase Assisted Spark-Plasma Sintering Of Sic Nanoceramics And Their Nanocomposites With Carbon Nanotubes
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Microstructural Effects On The Sliding-Wear Resistance Of Zrc–mosi2 Triboceramics Fabricated By Spark-Plasma Sintering
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Enhancing The Sliding-Wear Resistance Of Sic Nanostructured Ceramics By Adding Carbon Nanotubes
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Effect Of Tb3+ Doping And Self-Generated Pressure On The Crystallographic/morphological Features And Thermal Stability Of Lapo4·nh2o Single-Crystal Nanorods Obtained By Microwave-Assisted Hydrothermal Synthesis
Aqueous Colloidal Processing Of Near-Net Shape B4c-Ni Cermet Compacts
Effect Of Tb3+ Doping And Self-Generated Pressure On The Crystallographic/morphological Features And Thermal Stability Of Lapo4·nh2o Single-Crystal Nanorods Obtained By Microwave-Assisted Hydrothermal Synthesis
Enhancing The Spark-Plasma Sinterability Of B4c Nanopowders Via Room-Temperature Methylation Induced Purification
Effect Of Tb3+ Doping And Self-Generated Pressure On The Crystallographic/morphological Features And Thermal Stability Of Lapo4·nh2o Single-Crystal Nanorods Obtained By Microwave-Assisted Hydrothermal Synthesis
Enhancing The Spark-Plasma Sinterability Of B4c Nanopowders Via Room-Temperature Methylation Induced Purification
Calcia-Magnesia-Alumino-Silicate (Cmas)-Induced Degradation And Failure Of Air Plasma Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings
Enhancing The Spark-Plasma Sinterability Of B4c Nanopowders Via Room-Temperature Methylation Induced Purification
Calcia-Magnesia-Alumino-Silicate (Cmas)-Induced Degradation And Failure Of Air Plasma Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings
Aqueous Colloidal Processing Of Nano-Sic And Its Nano-Y3al5o12 Liquid-Phase Sintering Additives With Carbon Nanotubes
Calcia-Magnesia-Alumino-Silicate (Cmas)-Induced Degradation And Failure Of Air Plasma Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings
Aqueous Colloidal Processing Of Nano-Sic And Its Nano-Y3al5o12 Liquid-Phase Sintering Additives With Carbon Nanotubes
Critical Analysis Of A Coaxial Configuration For The Characterization Of Adhesive Wear And Its Application To Al And Al-Sn Alloys
Aqueous Colloidal Processing Of Nano-Sic And Its Nano-Y3al5o12 Liquid-Phase Sintering Additives With Carbon Nanotubes
Critical Analysis Of A Coaxial Configuration For The Characterization Of Adhesive Wear And Its Application To Al And Al-Sn Alloys
Densification Of B4c Nanopowder With Nanograin Retention By Spark-Plasma Sintering
Critical Analysis Of A Coaxial Configuration For The Characterization Of Adhesive Wear And Its Application To Al And Al-Sn Alloys
Densification Of B4c Nanopowder With Nanograin Retention By Spark-Plasma Sintering
Tribological Behavior Of Ionic Liquid-Based Magnetorheological Fluids In Steel And Polymeric Point Contacts
Densification Of B4c Nanopowder With Nanograin Retention By Spark-Plasma Sintering
Tribological Behavior Of Ionic Liquid-Based Magnetorheological Fluids In Steel And Polymeric Point Contacts
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Tribological Behavior Of Ionic Liquid-Based Magnetorheological Fluids In Steel And Polymeric Point Contacts
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Effect Of Processing Conditions On The Sliding-Wear Resistance Of Zrc Triboceramics Fabricated By Spark-Plasma Sintering
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Contact-Mechanical Properties At Intermediate Temperatures Of Zrb2 Ultra-High-Temperature Ceramics Pressureless Sintered With Mo, Ta, Or Zr Disilicides
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Improving The Sliding Wear Resistance Of Sic Nanoceramics Fabricated By Spark Plasma Sintering Via Gentle Post-Sintering Annealing
Influence Of The Synthesis Process On The Features Of Y2o 3-Stabilized Zro2 Powders Obtained By The Sol-Gel Method
Improving The Sliding Wear Resistance Of Sic Nanoceramics Fabricated By Spark Plasma Sintering Via Gentle Post-Sintering Annealing
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Improving The Sliding Wear Resistance Of Sic Nanoceramics Fabricated By Spark Plasma Sintering Via Gentle Post-Sintering Annealing
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Effect Of Hexagonal-Bn Additions On The Sliding-Wear Resistance Of Fine-Grained Α-Sic Densified With Y3al5o12 Liquid Phase By Spark-Plasma Sintering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Contact-Mechanical Properties At Pre-Creep Temperatures Of Fine-Grained Graphene/sic Composites Prepared In Situ By Spark-Plasma Sintering
Sliding-Wear Resistance Of Liquid-Phase-Sintered Sic Containing Graphite Nanodispersoids
Contact-Mechanical Properties At Pre-Creep Temperatures Of Fine-Grained Graphene/sic Composites Prepared In Situ By Spark-Plasma Sintering
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
Contact-Mechanical Properties At Pre-Creep Temperatures Of Fine-Grained Graphene/sic Composites Prepared In Situ By Spark-Plasma Sintering
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Effect Of Graphite Addition On The Spark-Plasma Sinterability Of Zrb 2 And Zrb2-Sic Ultra-High-Temperature Ceramics
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Synthesis And Photocatalytic Activity Of Eu3+-Doped Nanoparticulate Tio2 Sols And Thermal Stability Of The Resulting Xerogels
A Comparative Study Of The Pressureless Sinterability Of 3 Mol% Y2o3-Stabilized Zro2 Powders Prepared By The Sol-Gel Method Under Different Synthesis Conditions Without Modifiers
Synthesis And Photocatalytic Activity Of Eu3+-Doped Nanoparticulate Tio2 Sols And Thermal Stability Of The Resulting Xerogels
Microwave-Assisted Hydrothermal Synthesis Of Single-Crystal Nanorods Of Rhabdophane-Type Sr-Doped Lapo 4·n H2o
Synthesis And Photocatalytic Activity Of Eu3+-Doped Nanoparticulate Tio2 Sols And Thermal Stability Of The Resulting Xerogels
Microwave-Assisted Hydrothermal Synthesis Of Single-Crystal Nanorods Of Rhabdophane-Type Sr-Doped Lapo 4·n H2o
Additive-Free Superhard B4c With Ultrafine-Grained Dense Microstructures
Microwave-Assisted Hydrothermal Synthesis Of Single-Crystal Nanorods Of Rhabdophane-Type Sr-Doped Lapo 4·n H2o
Additive-Free Superhard B4c With Ultrafine-Grained Dense Microstructures
Carbon Nanotubes Prevent The Coagulation At High Shear Rates Of Aqueous Suspensions Of Equiaxed Ceramic Nanoparticles
Additive-Free Superhard B4c With Ultrafine-Grained Dense Microstructures
Carbon Nanotubes Prevent The Coagulation At High Shear Rates Of Aqueous Suspensions Of Equiaxed Ceramic Nanoparticles
Rare Earth-Doped Tio2 Nanocrystalline Thin Films: Preparation And Thermal Stability
Carbon Nanotubes Prevent The Coagulation At High Shear Rates Of Aqueous Suspensions Of Equiaxed Ceramic Nanoparticles
Rare Earth-Doped Tio2 Nanocrystalline Thin Films: Preparation And Thermal Stability
2zro2·y2o3 Thermal Barrier Coatings Resistant To Degradation By Molten Cmas: Part I, Optical Basicity Considerations And Processing
Rare Earth-Doped Tio2 Nanocrystalline Thin Films: Preparation And Thermal Stability
2zro2·y2o3 Thermal Barrier Coatings Resistant To Degradation By Molten Cmas: Part I, Optical Basicity Considerations And Processing
A Comparative Study Of The Tribological Performance Of Ferrofluids And Magnetorheological Fluids Within Steel-Steel Point Contacts
2zro2·y2o3 Thermal Barrier Coatings Resistant To Degradation By Molten Cmas: Part I, Optical Basicity Considerations And Processing
A Comparative Study Of The Tribological Performance Of Ferrofluids And Magnetorheological Fluids Within Steel-Steel Point Contacts
Cmas-Resistant Plasma Sprayed Thermal Barrier Coatings Based On Y 2o3-Stabilized Zro2 With Al3+ And Ti4+ Solute Additions
A Comparative Study Of The Tribological Performance Of Ferrofluids And Magnetorheological Fluids Within Steel-Steel Point Contacts
Cmas-Resistant Plasma Sprayed Thermal Barrier Coatings Based On Y 2o3-Stabilized Zro2 With Al3+ And Ti4+ Solute Additions
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Cmas-Resistant Plasma Sprayed Thermal Barrier Coatings Based On Y 2o3-Stabilized Zro2 With Al3+ And Ti4+ Solute Additions
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Sliding-Wear Resistance Of Ultrafine-Grained Sic Densified By Spark Plasma Sintering With 3y2o3 + 5al2o3 Or Y3al5o12 Additives
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Microstructural Effects On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Sic Under Diesel Fuel
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Spark-Plasma-Sintering Kinetics Of Zrc-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
Aqueous Colloidal Processing Of Submicrometric Sic Plus Y3al5o12 With Diamond Nanoparticles
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
Aqueous Colloidal Processing Of Sic With Y3al5o12 Liquid-Phase Sintering Additives
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
On The Enhancement Of The Spark-Plasma Sintering Kinetics Of Zrb 2-Sic Powder Mixtures Subjected To High-Energy Co-Ball-Milling
The Prolific Polytypism Of Silicon Carbide
Room Temperature One-Pot Solution Synthesis Of Nanoscale Cssni3 Orthorhombic Perovskite Thin Films And Particles
The Prolific Polytypism Of Silicon Carbide
Room Temperature One-Pot Solution Synthesis Of Nanoscale Cssni3 Orthorhombic Perovskite Thin Films And Particles
Toughening Of Super-Hard Ultra-Fine Grained B4c Densified By Spark-Plasma Sintering Via Sic Addition
Room Temperature One-Pot Solution Synthesis Of Nanoscale Cssni3 Orthorhombic Perovskite Thin Films And Particles
Toughening Of Super-Hard Ultra-Fine Grained B4c Densified By Spark-Plasma Sintering Via Sic Addition
Effect Of Er3+ Doping On The Thermal Stability Of Tio 2 Nanoparticulate Xerogels
Toughening Of Super-Hard Ultra-Fine Grained B4c Densified By Spark-Plasma Sintering Via Sic Addition
Effect Of Er3+ Doping On The Thermal Stability Of Tio 2 Nanoparticulate Xerogels
Study Of The Contributions Of Non-Specific And Specific Interactions During Fluoxetine Adsorption Onto Activated Carbons
Effect Of Er3+ Doping On The Thermal Stability Of Tio 2 Nanoparticulate Xerogels
Study Of The Contributions Of Non-Specific And Specific Interactions During Fluoxetine Adsorption Onto Activated Carbons
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Study Of The Contributions Of Non-Specific And Specific Interactions During Fluoxetine Adsorption Onto Activated Carbons
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Effect Of The Sintering Additive Content On The Protective Passive Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
Microstructural Evolution And Contact-Mechanical Properties Of Sic Ceramics Prepared Colloidally With Low Additive Content
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Microstructural Effects On The Sliding Wear Of Transparent Magnesium-Aluminate Spinel
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
A Route For The Pressureless Liquid-Phase Sintering Of Sic With Low Additive Content For Improved Sliding-Wear Resistance
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Effect Of Intergranular Phase Chemistry On The Sliding-Wear Resistance Of Pressureless Liquid-Phase-Sintered Α-Sic
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
Effects Of Composition And Crystallite Size On The Accuracy Of The Rietveld Method In Determining Lattice Parameters Of Polytypes In Multiphase Sic Ceramics
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Spark-Plasma Sintering Of Zrb 2 Ultra-High-Temperature Ceramics At Lower Temperature Via Nanoscale Crystal Refinement
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
In Situ Formation Of Zrb 2-Zro 2 Ultra-High-Temperature Ceramic Composites From High-Energy Ball-Milled Zrb 2 Powders
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
Improvement Of The Spark-Plasma-Sintering Kinetics Of Zrc By High-Energy Ball-Milling
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
Crystal-Size Dependence Of The Spark-Plasma-Sintering Kinetics Of Zrb2 Ultra-High-Temperature Ceramics
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
Composition Effects Of Thermal Barrier Coating Ceramics On Their Interaction With Molten Ca-Mg-Al-Silicate (Cmas) Glass
A Line-Broadening Analysis Model For The Microstructural Characterization Of Nanocrystalline Materials From Asymmetric X-Ray Diffraction Peaks
Composition Effects Of Thermal Barrier Coating Ceramics On Their Interaction With Molten Ca-Mg-Al-Silicate (Cmas) Glass
A Study Of The Oxidation Of Zrb 2 Powders During High-Energy Ball-Milling In Air
Composition Effects Of Thermal Barrier Coating Ceramics On Their Interaction With Molten Ca-Mg-Al-Silicate (Cmas) Glass
A Study Of The Oxidation Of Zrb 2 Powders During High-Energy Ball-Milling In Air
In Situ Formation Of Wc Platelets During The Synthesis Of Wc-Co Nano-Powder
A Study Of The Oxidation Of Zrb 2 Powders During High-Energy Ball-Milling In Air
In Situ Formation Of Wc Platelets During The Synthesis Of Wc-Co Nano-Powder
Densification Of Additive-Free Polycrystalline Β-Sic By Spark-Plasma Sintering
In Situ Formation Of Wc Platelets During The Synthesis Of Wc-Co Nano-Powder
Densification Of Additive-Free Polycrystalline Β-Sic By Spark-Plasma Sintering
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Densification Of Additive-Free Polycrystalline Β-Sic By Spark-Plasma Sintering
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Synthesis And Structural Characterization Of Two Bond Isomer Copper(Ii) Complexes Via Molecular Modeling Coupled With X-Ray Powder Diffractometry
Effect Of Type Of Solvent Alcohol And Its Molar Proportion On The Drying Critical Thickness Of Zro2-3 Mol% Y2o3 Films Prepared By The Sol-Gel Method
Synthesis And Structural Characterization Of Two Bond Isomer Copper(Ii) Complexes Via Molecular Modeling Coupled With X-Ray Powder Diffractometry
Synthesis And Structural Characterization Of Two New Copper(Ii) Complexes With Thiazoline Derivative Ligands: Influence Of The Coordination On The Phagocytic Activity Of Human Neutrophils
Synthesis And Structural Characterization Of Two Bond Isomer Copper(Ii) Complexes Via Molecular Modeling Coupled With X-Ray Powder Diffractometry
Synthesis And Structural Characterization Of Two New Copper(Ii) Complexes With Thiazoline Derivative Ligands: Influence Of The Coordination On The Phagocytic Activity Of Human Neutrophils
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Synthesis And Structural Characterization Of Two New Copper(Ii) Complexes With Thiazoline Derivative Ligands: Influence Of The Coordination On The Phagocytic Activity Of Human Neutrophils
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
On The Crystallite Size Refinement Of Zrb2 By High-Energy Ball-Milling In The Presence Of Sic
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Anomalous Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Sic
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Erratum: Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits (Acta Materialia (2010) 58 (6835-6844))
Effect Of Mosi2 Content On The Lubricated Sliding-Wear Resistance Of Zrc-Mosi2 Composites
Erratum: Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits (Acta Materialia (2010) 58 (6835-6844))
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Erratum: Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits (Acta Materialia (2010) 58 (6835-6844))
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
Effect Of Calcination Temperature On The Textural Properties Of 3 Mol% Yttria-Stabilized Zirconia Powders
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Effect Of Sintering Temperature On The Microstructure And Mechanical Properties Of Zro2-3 Mol%y2o3 Sol-Gel Films
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Effect Of N2 Sintering Atmosphere On The Hardness Of Sol-Gel Films Of 3 Mol% Y2o3-Stabilized Zro2
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Clarifying The Effect Of Sintering Conditions On The Microstructure And Mechanical Properties Of Β-Tricalcium Phosphate
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of The Sintering Additive Content On The Non-Protective Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Discriminating Between Two Chiral Diastereoisomeric 7-Oxanitronorbornenes By Conventional X-Ray Powder Diffractometry
Effect Of Ar Or N2 Sintering Atmosphere On The High-Temperature Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic In Air
Discriminating Between Two Chiral Diastereoisomeric 7-Oxanitronorbornenes By Conventional X-Ray Powder Diffractometry
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
Discriminating Between Two Chiral Diastereoisomeric 7-Oxanitronorbornenes By Conventional X-Ray Powder Diffractometry
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Hertzian Indentation Of A Zrb2-30% Sic Ultra-High-Temperature Ceramic Up To 800°c In Air
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
High-Energy Ball Milling Of Zrb2 In The Presence Of Graphite
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Experimental Study Of The Microstructure And Stress State Of Shot Peened And Surface Mechanical Attrition Treated Nickel Alloys
Oxidation Behaviour Of Pressureless Liquid-Phase-Sintered Α-Sic With Additions Of 5al2o3+3re2o3 (Re=la, Nd, Y, Er, Tm, Or Yb)
Experimental Study Of The Microstructure And Stress State Of Shot Peened And Surface Mechanical Attrition Treated Nickel Alloys
Spark Plasma Sintering And Microstructural Characterization Of Additive-Free Polycrystalline Β-Sic
Experimental Study Of The Microstructure And Stress State Of Shot Peened And Surface Mechanical Attrition Treated Nickel Alloys
Spark Plasma Sintering And Microstructural Characterization Of Additive-Free Polycrystalline Β-Sic
Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits
Spark Plasma Sintering And Microstructural Characterization Of Additive-Free Polycrystalline Β-Sic
Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits
A Direct Comparison In The Fatigue Resistance Enhanced By Surface Severe Plastic Deformation And Shot Peening In A C-2000 Superalloy
Air-Plasma-Sprayed Thermal Barrier Coatings That Are Resistant To High-Temperature Attack By Glassy Deposits
A Direct Comparison In The Fatigue Resistance Enhanced By Surface Severe Plastic Deformation And Shot Peening In A C-2000 Superalloy
Erratum: Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation (Ind. Eng. Chem. Res.(2009) 48:16 (9354) 10.1021/ie9013293)
A Direct Comparison In The Fatigue Resistance Enhanced By Surface Severe Plastic Deformation And Shot Peening In A C-2000 Superalloy
Erratum: Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation (Ind. Eng. Chem. Res.(2009) 48:16 (9354) 10.1021/ie9013293)
Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation
Erratum: Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation (Ind. Eng. Chem. Res.(2009) 48:16 (9354) 10.1021/ie9013293)
Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation
Crystal Structure Of [Nbu4]2[Pd2{C4(Coome)4}2(Μ-Oh)2] Determined Ab Initio By Charge Flipping
Porosity Development In Activated Carbons Prepared From Walnut Shells By Carbon Dioxide Or Steam Activation
Crystal Structure Of [Nbu4]2[Pd2{C4(Coome)4}2(Μ-Oh)2] Determined Ab Initio By Charge Flipping
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
Crystal Structure Of [Nbu4]2[Pd2{C4(Coome)4}2(Μ-Oh)2] Determined Ab Initio By Charge Flipping
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
Crystallite Size Refinement Of Zrb2 By High-Energy Ball Milling
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
Evaluation Of The Phase Composition Of (Nh4)2so4 + (Nh4)h2po4 Mixtures By X-Ray Diffractometry
An Analytical Model For The Determination Of Crystallite Size And Crystal Lattice Microstrain Distributions In Nanocrystalline Materials From The Variance Of The X-Ray Diffraction Peaks
Evaluation Of The Phase Composition Of (Nh4)2so4 + (Nh4)h2po4 Mixtures By X-Ray Diffractometry
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Evaluation Of The Phase Composition Of (Nh4)2so4 + (Nh4)h2po4 Mixtures By X-Ray Diffractometry
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Textural And Morphological Study Of Activated Carbon Fibers Prepared From Kenaf
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Unexpected Reactions: From (2s,3r)-2-(Endo-D-Galacto-Pentaacetoxypentyl)-1, 4-Dimethyl-3-Exo-Nitro-7-Oxabicyclo[2.2.1]hept-5-Ene To Chiral Cyclic Ethers
Oxidation Behavior Of Pressureless Liquid-Phase-Sintered Α-Sic In Ambient Air At Elevated Temperatures
Unexpected Reactions: From (2s,3r)-2-(Endo-D-Galacto-Pentaacetoxypentyl)-1, 4-Dimethyl-3-Exo-Nitro-7-Oxabicyclo[2.2.1]hept-5-Ene To Chiral Cyclic Ethers
A Family Of Hydrogels Based On Ureido-Linked Aminopolyol-Derived Amphiphiles And Bolaamphiphiles: Synthesis, Gelation Under Thermal And Sonochemical Stimuli, And Mesomorphic Characterization
Unexpected Reactions: From (2s,3r)-2-(Endo-D-Galacto-Pentaacetoxypentyl)-1, 4-Dimethyl-3-Exo-Nitro-7-Oxabicyclo[2.2.1]hept-5-Ene To Chiral Cyclic Ethers
A Family Of Hydrogels Based On Ureido-Linked Aminopolyol-Derived Amphiphiles And Bolaamphiphiles: Synthesis, Gelation Under Thermal And Sonochemical Stimuli, And Mesomorphic Characterization
Tensile Properties Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
A Family Of Hydrogels Based On Ureido-Linked Aminopolyol-Derived Amphiphiles And Bolaamphiphiles: Synthesis, Gelation Under Thermal And Sonochemical Stimuli, And Mesomorphic Characterization
Tensile Properties Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
Influence Of Preparation Conditions In The Textural And Chemical Properties Of Activated Carbons From A Novel Biomass Precursor: The Coffee Endocarp
Tensile Properties Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
Influence Of Preparation Conditions In The Textural And Chemical Properties Of Activated Carbons From A Novel Biomass Precursor: The Coffee Endocarp
Hall-Petch Relationship In A Nanotwinned Nickel Alloy
Influence Of Preparation Conditions In The Textural And Chemical Properties Of Activated Carbons From A Novel Biomass Precursor: The Coffee Endocarp
Hall-Petch Relationship In A Nanotwinned Nickel Alloy
Crystallite Sizes Of Lih Before And After Ball Milling And Thermal Exposure
Hall-Petch Relationship In A Nanotwinned Nickel Alloy
Crystallite Sizes Of Lih Before And After Ball Milling And Thermal Exposure
Interrogation Of The Microstructure And Residual Stress Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
Crystallite Sizes Of Lih Before And After Ball Milling And Thermal Exposure
Interrogation Of The Microstructure And Residual Stress Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Interrogation Of The Microstructure And Residual Stress Of A Nickel-Base Alloy Subjected To Surface Severe Plastic Deformation
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Effect Of The Nature Of The Intergranular Phase On Sliding-Wear Resistance Of Liquid-Phase-Sintered Α-Sic
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Hardness Degradation In Liquid-Phase-Sintered Sic With Prolonged Sintering
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Microstructural Design Of Sliding-Wear-Resistant Liquid-Phase-Sintered Sic: An Overview
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Sliding-Wear-Resistant Liquid-Phase-Sintered Sic Processed Using Α-Sic Starting Powders
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Effect Of Liquid-Phase Content On The Contact-Mechanical Properties Of Liquid-Phase-Sintered Α-Sic
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Synthesis, Spectroscopic Study And Crystal Structure Determination By X-Ray Powder Diffractometry Of Cdcl2(Tztn)j [Tztn=2-(3,4-Dichlorophenyl) Imino-N(2-Thiazolin-2-Yl)tetrahydro-L,3-Thiazine]
Creep And Microstructural Evolution At High Temperature Of Liquid-Phase-Sintered Silicon Carbide
Synthesis, Spectroscopic Study And Crystal Structure Determination By X-Ray Powder Diffractometry Of Cdcl2(Tztn)j [Tztn=2-(3,4-Dichlorophenyl) Imino-N(2-Thiazolin-2-Yl)tetrahydro-L,3-Thiazine]
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Synthesis, Spectroscopic Study And Crystal Structure Determination By X-Ray Powder Diffractometry Of Cdcl2(Tztn)j [Tztn=2-(3,4-Dichlorophenyl) Imino-N(2-Thiazolin-2-Yl)tetrahydro-L,3-Thiazine]
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Determination Of The Thermal Stability And Isothermal Bulk Modulus Of The Zro2 Polymorphs At Room Temperature By Molecular Dynamics With A Semi-Empirical Quantum-Chemical Model
Complex Impedance Spectroscopy Study Of A Liquid-Phase-Sintered Α-Sic Ceramic
Determination Of The Thermal Stability And Isothermal Bulk Modulus Of The Zro2 Polymorphs At Room Temperature By Molecular Dynamics With A Semi-Empirical Quantum-Chemical Model
Structure Determination Of Di - Hydroxo-Bis[(2-(2-Pyridyl)phenyl- 2 N,c 1)palladium(Ii)] By X-Ray Powder Diffractometry
Determination Of The Thermal Stability And Isothermal Bulk Modulus Of The Zro2 Polymorphs At Room Temperature By Molecular Dynamics With A Semi-Empirical Quantum-Chemical Model
Structure Determination Of Di - Hydroxo-Bis[(2-(2-Pyridyl)phenyl- 2 N,c 1)palladium(Ii)] By X-Ray Powder Diffractometry
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Structure Determination Of Di - Hydroxo-Bis[(2-(2-Pyridyl)phenyl- 2 N,c 1)palladium(Ii)] By X-Ray Powder Diffractometry
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
Effect Of Ion Nitriding On The Crystal Structure Of 3 Mol% Y 2 O 3 -Doped Zro 2 Thin-Films Prepared By The Sol-Gel Method
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
Analytical Formulation Of The Variance Method Of Line-Broadening Analysis For Voigtian X-Ray Diffraction Peaks
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
Stability Of Lithium Hydride In Argon And Air
Novel Analytical Model For The Determination Of Grain Size Distributions In Nanocrystalline Materials With Low Lattice Microstrains By X-Ray Diffractometry
Stability Of Lithium Hydride In Argon And Air
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
Stability Of Lithium Hydride In Argon And Air
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
New Acrylic Monolithic Carbon Molecular Sieves For O2/n 2 And Co2/ch4 Separations
Determination Of Optical Properties In Nanostructured Thin Films Using The Swanepoel Method
New Acrylic Monolithic Carbon Molecular Sieves For O2/n 2 And Co2/ch4 Separations
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
New Acrylic Monolithic Carbon Molecular Sieves For O2/n 2 And Co2/ch4 Separations
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Synthesis, Molecular Characterization By Infrared Spectroscopy, And Crystal Structure Determination By X-Ray Powder Diffractometry Of [Zncl 2(Tdtz)] [Tdtz = 2-(3,4-Dichlorophenyl)imino-N-(2-Thiazin-2-Yl) Thiazolidine]
Propiedades Mecánicas A Temperatura Ambiente De Cerámicos De A-Sic Sinterizados Con Fase Líquida De Y2o3-Al2o3
Synthesis, Molecular Characterization By Infrared Spectroscopy, And Crystal Structure Determination By X-Ray Powder Diffractometry Of [Zncl 2(Tdtz)] [Tdtz = 2-(3,4-Dichlorophenyl)imino-N-(2-Thiazin-2-Yl) Thiazolidine]
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Synthesis, Molecular Characterization By Infrared Spectroscopy, And Crystal Structure Determination By X-Ray Powder Diffractometry Of [Zncl 2(Tdtz)] [Tdtz = 2-(3,4-Dichlorophenyl)imino-N-(2-Thiazin-2-Yl) Thiazolidine]
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Improved Sliding-Wear Resistance In In Situ-Toughened Silicon Carbide
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Wear-Resistant Ultra-Fine-Grained Ceramics
Effect Of Microstructure On Sliding-Wear Properties Of Liquid-Phase- Sintered Α-Sic
Wear-Resistant Ultra-Fine-Grained Ceramics
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Wear-Resistant Ultra-Fine-Grained Ceramics
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Room-Temperature Mechanical Properties Of Liquid-Phase-Sintered Α-Sic With Y2o3-Al2o3 Additions
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Densification And Porosity Evaluation Of Zro2-3 Mol.% Y 2o3 Sol-Gel Thin Films
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Structure Determination Of Nitrato-Κo-Bis[2-(2-Pyridyl-Κn) Amino-5,6-Dihydro-4h-1,3-Thiazine-Κn]copper(Ii) Nitrate Via Molecular Modelling Coupled With X-Ray Powder Diffractometry
Effect Of Sintering Atmosphere On The Mechanical Properties Of Liquid-Phase-Sintered Sic
Structure Determination Of Nitrato-Κo-Bis[2-(2-Pyridyl-Κn) Amino-5,6-Dihydro-4h-1,3-Thiazine-Κn]copper(Ii) Nitrate Via Molecular Modelling Coupled With X-Ray Powder Diffractometry
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Structure Determination Of Nitrato-Κo-Bis[2-(2-Pyridyl-Κn) Amino-5,6-Dihydro-4h-1,3-Thiazine-Κn]copper(Ii) Nitrate Via Molecular Modelling Coupled With X-Ray Powder Diffractometry
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
Ab Initio Structural Determination Of 2-(2-Pyridyl)imino-N-(2-Thiazolin-2-Yl)thiazolidine From Powder Diffraction Data
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Determination Of Lattice Parameters Of Polytypes In Liquid-Phase-Sintered Sic Using The Rietveld Method
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
A Simple, Accurate And Effective Polymorphic Method To Determine Phase Compositions Of Sic-Based Ceramics
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
X-Ray Diffraction Analysis Of A Severely Plastically Deformed Aluminum Alloy
Phase Composition Analysis Of Zirconia Using A Simple Polimorphic Method
X-Ray Diffraction Analysis Of A Severely Plastically Deformed Aluminum Alloy
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
X-Ray Diffraction Analysis Of A Severely Plastically Deformed Aluminum Alloy
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Iii, Effect Of Nitrogen-Gas Sintering Atmosphere
X-Ray Line-Broadening Study Of A Liquid-Phase-Sintered Silicon Carbide
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Iii, Effect Of Nitrogen-Gas Sintering Atmosphere
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Iii, Effect Of Nitrogen-Gas Sintering Atmosphere
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Quantitative Polytype-Composition Analyses Of Sic Using X-Ray Diffraction: A Critical Comparison Between The Polymorphic And The Rietveld Methods
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
X-Ray Powder Diffraction Analysis Of A Silicon Carbide-Based Ceramic
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
Accuracy Of X-Ray Diffraction Sic Polytype-Composition Analyses Performed By A Polymorphic Method
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Ii, Effects Of Planar Defects And Seeds In The Starting Powder
Deconvolution Of X-Ray Diffraction Profiles Using Series Expansion: A Line-Broadening Study Of Polycrystalline 9-Ysz
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Ii, Effects Of Planar Defects And Seeds In The Starting Powder
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part I, Effect Of Starting Powder
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part Ii, Effects Of Planar Defects And Seeds In The Starting Powder
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part I, Effect Of Starting Powder
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Microstructural Evolution In Liquid-Phase-Sintered Sic: Part I, Effect Of Starting Powder
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
X-Ray Powder Diffraction Analysis Of Liquid-Phase-Sintered Silicon Carbide Ceramics
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Fundamental Parameters Approach In The Rietveld Method: A Study Of The Stability Of Results Versus The Accuracy Of The Instrumental Profile
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Aplicación Del Método Rietveld Al Análisis Cuantitativo Sic Sinterizado En Fase Líquida
Quantitative Phase-Composition Analysis Of Liquid-Phase-Sintered Silicon Carbide Using The Rietveld Method
Aplicación Del Método Rietveld Al Análisis Cuantitativo Sic Sinterizado En Fase Líquida
A Comparison Of The Corrosion Behaviour Over Time In 0.5 M Nacl Environment Of Ticn Spark Plasma Sintered With And Without Si Aids
WEB ACCESIBLE